Caustic Soda Handbook - Occidental · PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (2024)

Caustic Soda Handbook - Occidental · PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (1)

OX

YC

HE

M

C a u s t i c S o d a H a n d b o o k

Caustic Soda Handbook - Occidental · PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (2)

2

Occidental Chemical Corporation (OxyChem) is a leading North American manufacturer of polyvinyl

chloride (PVC) resins, chlorine and caustic soda — key building blocks for a variety of indispensable

products such as plastics, pharmaceuticals and water treatment chemicals. Other OxyChem products

include caustic potash, chlorinated organics, sodium silicates, chlorinated isocyanurates and calcium

chloride. OxyChem’s market position is among the top three producers in the United States for the

principal products it manufactures and markets. Based in Dallas, Texas, the company has

manufacturing facilities in the U.S., Canada and Latin America.

OxyChem has been an active participant in the American Chemistry Council's Responsible Care®

initiative since its inception in 1988. Demonstrating their commitment to attaining the highest levels of

safety and environmental achievement, Responsible Care companies implement world-class

management systems, measure performance based on industry-wide metrics, and are subject to

review by independent auditors.

Foreword

This handbook outlines recommended methods for handling, storing, preparing and using caustic soda.

It also includes information on the manufacture, physical properties, safety considerations and

analytical methods for testing caustic soda. Additional information and contacts can be found on the

internet at www.oxychem.com

Important: The information presented herein, while not guaranteed, was prepared by technical

personnel and is true and accurate to the best of our knowledge. NO WARRANTY OF

MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE, OR WARRANTY OR

GUARANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, IS MADE REGARDING PURITY,

PERFORMANCE, SAFETY, SUITABILITY, STABILITY OR OTHERWISE. This information is not

intended to be all-inclusive as to the manner and conditions of use, handling, storage, disposal and

other factors that may involve other or additional legal, environmental, safety or performance

considerations, and Occidental Chemical Corporation assumes no liability whatsoever for the use of or

reliance upon this information. While our technical personnel will be happy to respond to questions,

safe handling and use of the product remains the responsibility of the customer. No suggestions for

use are intended as, and nothing herein shall be construed as, a recommendation to infringe any

existing patents or to violate any Federal, State, local or foreign laws.

Caustic Soda Handbook - Occidental · PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (3)

T A B L E O F C O N T E N T S

Introduction 4

Principal Uses 5

Manufacturing 6

Methods of Shipping 10

Safe Handling 11

Unloading 14

Unloading railcars 14

Heating a railcar 16

Bottom unloading using gravity 19

Bottom unloading using pressure 20

Top unloading 20

Unloading tank trucks 22

Equipment for Handling 24

Technical Data 28

Table 1 Density and NaOH content of membrane grade caustic soda solutions at 60°F 28

Table 2 Density and NaOH content of diaphragm grade caustic soda solutions at 60°F 29

Table 3 Specific heats of caustic soda in Btu/lb·°F 30

Graph 1 Boiling and solidifying temperature of aqueous caustic soda solutions 31

Graph 2 Specific gravity of aqueous caustic soda solutions 32

Graph 3 Viscosity of aqueous caustic soda solutions 33

Graph 4 Vapor pressure of aqueous caustic soda solutions 34

Graph 5 Approximate resultant temperature when diluting caustic soda 35

Graph 6 Relative enthalpy of aqueous caustic soda solutions 36

Graph 7 Solubility of sodium chloride in aqueous caustic soda solutions 37

Graph 8 Thermal conductivity of aqueous caustic soda solutions 38

Graph 9 Specific conductance of aqueous caustic soda solutions 39

Dilution Calculations 40

Methods of Analysis 43

Determination of the total alkalinity of caustic soda 43

Determination of sodium hydroxide in caustic soda 46

Determination of sodium carbonate in caustic soda 49

Determination of sodium chloride in caustic soda 53

Determination of iron in caustic soda 58

Determination of other elements in caustic soda 62

Billing for liquid caustic soda 63

Bibliography 64

Caustic Soda Handbook - Occidental · PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (4)

4

I N T R O D U C T I O N

Caustic soda (sodium hydroxide or NaOH) is most commonly manufactured by the electrolysis of a

sodium chloride (NaCl) solution. OxyChem manufactures caustic soda using either membrane or

diaphragm electrolytic cells. OxyChem does not use mercury based electrolytic cells to produce caustic

soda. The co-products formed from the electrolytic production of caustic soda are chlorine and hydrogen.

Liquid caustic soda is available as a 50% solution in two main grades. The names of these main grades

correspond to the electrolytic cells used to produce the caustic soda; membrane grade and diaphragm grade.

OxyChem can also provide dilutions of various concentrations.

The major difference in the two main grades is the amount of starting material (sodium chloride) remaining

in the final product. Membrane grade caustic soda will have less than 100 ppm of the sodium chloride

remaining in the product. Diaphragm grade material will have less than 1.2% sodium chloride. Several

other differences can be seen in the products when the specification sheets are compared. Specification

sheets for each grade can be found on our website at www.oxychem.com.

All OxyChem’s caustic soda meets the test requirements specified in the Food Chemicals Codex

(FCC). Not all OxyChem’s caustic soda is produced following all cGMP (current Good Manufacturing

Practices) requirements as defined by the FDA (Food and Drug Administration). OxyChem does

produce a food grade caustic soda, which is produced following cGMP requirements as defined by the

FDA. OxyChem does not represent or warrant general compliance of this product for food use. Each

prospective use of a product in a food or food related application must be carefully assessed against

appropriate regulations by the user and it cannot be assumed that products meeting FCC test

requirements are satisfactory for all uses without such assessment.

OxyChem has played a leading role in providing caustic soda to meet the increasing demands of industry.

OxyChem plants are strategically located to conveniently and economically serve industry.

Caustic soda is shipped via pipelines, tank trucks, railcars, barges and ships. Terminals are used to maintain

stocks of our caustic soda in many principal cities. Distributor stocks are also available in these and

many other cities and form a network of supply for the end user’s convenience.

The largest users of caustic soda

are the pulp and paper, detergent

and chemical industries. Caustic

soda is also used in the alumina, oil

and gas and textile industries,

mostly for its alkalinity value.

< Membrane

Diaphragm >

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (5)

P R I N C I P A L U S E S A N D C O N S U M P T I O N O F C A U S T I C S O D A

Caustic soda is one of the very few chemicals utilized in a very broad range of applications. Some principal

products or processes in which caustic soda is used are:

Acid Neutralization

Agricultural Chemicals

Aluminum

Battery Recycling

Bleach

Boiler Compounds

Cellulose Film

Detergents

Drain Cleaners

Drilling Muds

Dyestuffs

Food Processing

Fruit & Vegetable Peeling

Glass-Batch Wetting

Ion-Exchange Resin Regeneration

Ore Floatation and Processing

Paint Removers

Petroleum Refining

pH Adjustment

Pharmaceuticals

Pigments

Pulp & Paper

Rayon

Soap

Surfactants

Textile Bleaching

Vegetable Oil Processing

Water Treatment

Chemical Manufacture of:

Ammonia

Amyl Amines

Cresol

Ethylene Amines

Formic Acid

Glycerine

Maleic Anhydride

Pentaerythritol

Phenol

Propylene Oxide

Polycarbonates

Salicylic Acid

Sodium Aluminate

Sodium Hydrosulfide

Sodium Hypochlorite

Sodium Phosphates

Styrene

Vinyl Chloride Monomer

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (6)

6

Caustic soda is produced by OxyChem by an electrolytic process as shown in the following diagrams. Brine,

prepared from sodium chloride (NaCl), is electrolyzed in either a membrane cell or a diaphragm cell. The

production of caustic soda (NaOH) also results in the co-products of chlorine and hydrogen.

In the membrane process, a solution of approximately 33% in strength is formed. The solution is then

sent to evaporators, which concentrate it to a strength of 50% by removing the appropriate amount of

water.

M A N U F A C T U R I N G P R O C E S S

Water Treatment Deionized Water

Brine Treatment Treated Brine

Carbonate Liquor

ProductionCarbonate Liquor

Electrolysis

(Membrane Cell)

33% Cell Liquor

Evaporation

50%

Membrane

Caustic

Soda

Carbon Dioxide

River Water

Salt (NaCl)

Hydrogen

gas

Chlorine

gas

Cooling

Condensate

DechlorinationSulfite Depleted Brine

M E M B R A N E C E L L F L O W D I A G R A M

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (7)

M A N U F A C T U R I N G P R O C E S S

M E M B R A N E C E L L

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (8)

8

M A N U F A C T U R I N G P R O C E S S

The diaphragm process is similar to the membrane process except that a solution of only 12% is formed

in the cell. Again, additional evaporation is required to reach the saleable concentration of 50%.

Water Treatment Clarified Water

Brine Treatment Treated Brine

Carbonate Liquor

ProductionCarbonate Liquor

Electrolysis

(Diaphragm Cell)

12% Cell Liquor

Evaporation

50%

Diaphragm

Caustic

Soda

Carbon Dioxide

River Water

Salt (NaCl)

Hydrogen

gas

Chlorine

gas

Cooling/Filtration

Condensate

Salt

D I A P H R A G M C E L L F L O W D I A G R A M

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (9)

M A N U F A C T U R I N G P R O C E S S

D I A P H R A G M C E L L

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (10)

10

S H I P P I N G M E T H O D S

Liquid caustic soda is available from OxyChem’s many plants and terminals in tank truck, rail tank

car, barge and ship quantities. Each form of transportation has its own advantages. The type of

service selected will depend upon such factors as size and location of storage, rate of consumption,

plant location, freight rates, etc.

Liquid caustic soda is regulated by the U.S. Department of Transportation (DOT) and is

classified as a corrosive material. The DOT identification number is UN I824 for liquid caustic

soda.

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (11)

Caustic soda in any concentration must be respected by everyone who handles and uses it.

Before starting to work with it, the user should be aware of its properties, know what safety

precautions to follow, and know how to react in case of contact. Accidental exposure to caustic

soda may occur under several conditions. Potentially hazardous situations include handling

and packaging operations, equipment cleaning and repair, decontamination following spills and

equipment failures. Employees who may be subject to such exposure must be provided with

proper personal protective equipment and trained in its use. Some general guidelines follow:

1. Read and understand the latest Safety Data Sheet.

2. Provide eyewash fountains and safety showers in all areas where caustic soda is used or

handled. Any caustic soda burn may be serious. DO NOT use any kind of neutralizing

solution, particularly in the eyes, without direction by a physician.

3. Move the patient to a hospital emergency room immediately after first aid measures are

applied.

FIRST AID MEASURES

INHALATION: If inhalation of mists, vapors, or spray occurs and adverse effects result, remove

to uncontaminated area. Evaluate ABC's (is Airway constricted, is Breathing occurring, and is blood

Circulating) and treat symptomatically. GET MEDICAL ATTENTION IMMEDIATELY.

SKIN CONTACT: Immediately flush contaminated areas with water. Remove contaminated

clothing, jewelry and shoes. Wash contaminated areas with large amounts of water. GET MEDICAL

ATTENTION IMMEDIATELY. Thoroughly clean and dry contaminated clothing before reuse. Discard

contaminated leather goods.

EYE CONTACT: Immediately flush contaminated eyes with a directed stream of water for as long

as possible. Remove contact lenses, if present, then continue rinsing. GET MEDICAL ATTENTION

IMMEDIATELY.

INGESTION: If swallowed, do not induce vomiting. For definite or probable ingestion, do not

administer oral fluids. If vomiting occurs spontaneously, keep airway clear. Monitor airway. Volume

resuscitation (IV fluids) and circulatory support (CPR) may be required. Never give anything by mouth to

an unconscious or convulsive person. GET MEDICAL ATTENTION IMMEDIATELY.

S A F E H A N D L I N G C A U S T I C S O D A

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (12)

12

S A F E H A N D L I N G C A U S T I C S O D A

PROTECTIVE EQUIPMENT

OSHA requires employers to supply suitable protective equipment for employees. When handling

caustic soda, the following protective equipment is recommended:

Wear suitable chemical splash goggles for eye protection during the handling of caustic soda in any

concentration. The goggles should be close fitting and provide adequate ventilation to prevent fogging,

without allowing entry of liquids. The use of a face shield may be appropriate when splashing can

occur, including loading and unloading operations.

Wear rubber gloves or gloves coated with rubber, synthetic elastomers, PVC, or other plastics to protect

the hands while handling caustic soda. Gloves should be long enough to come well above the wrist.

Sleeves should be positioned over the glove.

Caustic soda causes leather to disintegrate quite rapidly. For this reason, wear rubber boots. Wear the

bottoms of trouser legs outside the boots. DO NOT tuck trouser legs into boots.

Wear chemical resistant clothing for protection of the body. Impregnated vinyl or rubber suits are

recommended.

Wear hard hats for some protection of the head, face and neck.

If exposures are expected to exceed accepted regulatory limits or if respiratory discomfort is

experienced use a NIOSH approved air purifying respirator with high efficiency dust and mist filters.

PROTECTIVE PRACTICES

Keep equipment clean by immediately washing off any spill or accumulation of caustic soda.

Weld pipelines where practical. Use flanged joints with gaskets made of caustic soda resistant material

such as rubber, PTFE, or EPDM rubber. If a screwed fitting is used, apply Teflon® tape to the threads.

When disconnecting equipment for repairs, first verify that there is no internal pressure on the equipment

and the equipment has been drained and washed.

Provide storage tanks with suitable overflow pipes. Overflow pipes should be directed to a protected

overflow area away from operations.

Shield the seal area of pumps to prevent spraying of caustic solutions in the event of a leak.

When releasing air pressure from a pressurized system, take every precaution to avoid spurts or

sprays of caustic solution.

In case of a spill or leak, stop the leak as soon as possible. After containment, collect the spilled

material and transfer to a chemical waste area. Remove large liquid spills by vacuum truck. Neutralize

residue with dilute acid. Flush spill area with water and follow with a liberal covering of sodium

bicarbonate or other acceptable drying agent.

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (13)

S A F E H A N D L I N G C A U S T I C S O D A

HANDLING LIQUID CAUSTIC SODA

In handling caustic soda solutions, care must be taken to avoid solidification which will plug pipelines

and equipment. Graph 1 on page 31 shows the freezing points for solutions of caustic soda at various

concentrations.

Should a caustic soda solution become frozen in process equipment or piping, care must be taken

when thawing the material. The use of atmospheric pressure steam is suggested. Accelerated

corrosion can occur in areas where equipment is subjected to extremely high temperatures.

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (14)

14

U N L O A D I N G A N D H A N D L I N G C A U S T I C S O D A I N R A I L C A R S

GENERAL INFORMATION

Liquid caustic soda has a markedly corrosive action on all body tissue. Even dilute solutions may

have a destructive effect on tissue after prolonged contact. Inhalation of mists can cause damage

to the upper respiratory tract, while ingestion of liquid caustic soda can cause severe damage to

the mucous membranes or other tissues where contact is made.

It is important that those who handle caustic soda are aware of its corrosive properties and

know what precautions to take. In case of accidental exposure, immediately flush the exposed

area with large amounts of water and seek medical attention. For more specific information

refer to the Safe Handling section of this handbook and in the OxyChem SDS for liquid caustic

soda.

PLACEMENT OF THE RAILCAR FOR UNLOADING

1. After the car is at the loading spot, DOT regulations require that the hand brake be set and the

wheels blocked (chocks).

2. DOT regulations require caution sign(s) be placed on or next to the rail track to warn persons

approaching the car from the access track end(s). Caution signs must be left up until the railcar is

completely unloaded and disconnected from the customer’s connections. Signs must be made of metal or

other suitable material, at least 12x15 inches in size, and bear the words, “STOP-TANK CAR

CONNECTED”, or “STOP-MEN AT WORK.”

3. It is recommended that a locked switch or derail device be placed at the access track end(s), a

minimum of one car length away from the railcar to be unloaded.

4. A railcar of caustic soda should only be unloaded when adequate lighting is available.

5. A suitable ramp should be used to access the railcar top operating or safety platform. The access

ramp chosen should accommodate a variety of platform widths because of variations in rail car

manufacturers, and railcar heights since the railcar will rise while unloading.

UNLOADING PRECAUTIONS

Before making any connections, verify the content of the railcar is caustic soda.

Test the nearest eyewash and safety shower per your facility procedure.

Only responsible and properly trained personnel should unload liquid caustic soda. Unloading

operations must be monitored while the car is connected.

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (15)

Since serious burns can result from contact of caustic soda with the eyes and skin, the personal

protective equipment (PPE) listed below is recommended when handling equipment for caustic soda.

Based on a job task analysis or job hazard assessment more PPE may be appropriate.

Hard hat

Mono-goggles

Face shield

Rubber, steel-toed boots

Chemical gloves

Chemical resistant suit

Respiratory protection

Make certain the storage tank is vented and has sufficient room available for the contents of the

entire railcar.

Consider restricting access to the area around the railcar and transfer line to the storage during the

actual transfer operation.

If a railcar needs to be moved when partially unloaded, DOT regulations require that all unloading lines

must be disconnected and railcar closures must be replaced.

A railcar may be sampled either from the top manway, or from the top eductor line using a suitable

procedure. Sampling from the bottom unload piping is not recommended. If a railcar has partially frozen

and has been thawed, special sampling techniques may be required due to stratified concentrations

that may be present.

OxyChem’s liquid caustic soda is shipped in insulated and lined railcars. Typical linings have an upper

temperature limit of 225°F. Therefore, recommended ‘trapped steam’ pressure used in the coils to heat

up a rail railcar is limited to 15 psig max. Most customers use atmospheric steam in the coils.

Unloading lines should insulated and heated when used to transfer liquid caustic soda to storage in cold

climates. The preferred method of heating is to provide electric or steam heat tracing around the

unloading line, under the insulation. An alternate method is to provide tees in the unloading line so that

steam (or hot water) can be run through the unloading line just prior to its use. Use caution using this

method so as to NOT put water or steam directly into the railcar of caustic soda. NOTE: Running

steam through unlined steel piping systems can result in increased corrosion and iron pickup

in the product.

A properly designed and equipped padding system must be used if the railcar will be pad pressure

unloaded. Compressed air is the most common padding gas. Nitrogen can also be used but it is more

costly and it has the additional hazard of being an asphyxiant gas, thus extra precautions are required.

All fittings used for padding a railcar should be inspected for defects before each use.

The air supply system should be oil free, and have a pressure relief valve set at 25 psig, and a pressure

regulator set at 18 to 20 psig. The removable connection piping used on the railcar vent valve should also

have a pressure gauge, a release (vent) valve and a shut­off valve.

U N L O A D I N G A N D H A N D L I N G C A U S T I C S O D A I N R A I L C A R S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (16)

16

General purpose caustic railcars are structurally constructed to a 100 psig design and with a burst rating of

approximately 500 psig. Per 49 CFR 179.15, caustic railcars can have a pressure relief device installed that

is set for 75 to 165 psig. The lower rated relief devices are sometimes hydraulically activated during rough

transport handling, and can release some liquid onto the jacket area.

Even though they are designed and equipped as stated, these are NOT pressure railcars and should not be

padded above the OxyChem and the Chlorine Institute recommended range of 20 to 25 psig max.

At OxyChem after a railcar is loaded with product, it is padded up to approximately 30 psig and leak

checked to meet the DOT shipping requirement. That test pad pressure is released prior to shipping.

Because of inherent shaking and jarring experienced by the railcar and contents during the shipping

process, gaskets and joints can loosen up and customers should be cautious of that possibility. If pressure

unloading, particular areas to watch are the manway gasket, the bottom flange gasket (when bottom

unloading), and the top operator stuffing box gland area for the bottom outlet valve (BOV) if so equipped.

Additionally, the top operated bottom outlet valve reach rods can, in rare instances, come detached during

transit. There have been reports that these detached rods can be pushed up from a railcar if unloading

pressures greater than 30 psig are used.

HANDLING IN COLD WEATHER

Since OxyChem tank cars are well insulated and liquid caustic soda is loaded hot (~100F ), product usually

arrives at its destination in a liquid state. However, since 50% liquid caustic soda begins to crystallize at 54°F, in

cases of unusual delays in transit, partial freezing may take place in cold weather.

A temperature measurement of the caustic soda is the best indication if steaming is required. If the railcar

product is 65°F or cooler, heating is recommended prior to unloading. Even if all liquid, it may flow poorly due to

its higher viscosity.

If a railcar temperature is over 65°F but product will not flow from the BOV (bottom unloading), try applying a

steam lance for a few minutes to the BOV and auxiliary valve. This uninsulated piping area is prone to freezing.

If freezing has occurred, the following procedure should be used:

1. Vent the railcar – OxyChem recommends opening the railcar manway cover.

2. Connect a steam line to the bottom jacket connection pipe, and/or at the BOV connection. Connect a

condensate return line at the steam condensate outlet pipe. If a steam trap is used on the exit of a

railcar, OxyChem recommends regulating the steam pressure into the coils to a maximum of 15

psig. This is to protect the lining from excessive spot heating, which will damage the lining. If a

condensate return line is not used, the condensate must be disposed of or otherwise utilized in a

manner compliant with all environmental regulations.

U N L O A D I N G A N D H A N D L I N G C A U S T I C S O D A I N R A I L C A R S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (17)

The amount of material that is frozen in a caustic soda rail car is dependent upon the outside

temperature, wind chill, and the time elapsed between when the railcar was loaded and is unloaded.

In very cold winter conditions, it is possible for a caustic soda railcar to be totally frozen. For this case,

it may be necessary to steam the rail car for as long as three days (72+ hours) to fully liquefy all of the

contents.

A temperature measurement is the best indication as to when the contents have liquefied and the

caustic soda is ready for unloading. The recommended minimum unloading temperature of 50%

caustic soda is 70°F. At 70°F through 90°F steaming may be desirable to reduce viscosity.

If the above measures do not liquefy the contents on the railcar, contact your OxyChem technical

representative.

ADDITIONAL NOTES FOR HEATING RAILCARS:

Do not exceed a steam pressure of 15 psig on the jacket. Certain railcar linings can be damaged using steam

pressure above15 psig.

Do not keep steam on while emptying the railcar. Exposing the steam coils without fluid present to

dissipate the heat can damage the lining due to local heating.

Do not heat the product over 120oF to minimize corrosion of unlined steel piping systems and

equipment.

U N L O A D I N G A N D H A N D L I N G C A U S T I C S O D A I N R A I L C A R S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (18)

18

U N L O A D I N G A N D H A N D L I N G C A U S T I C S O D A I N R A I L C A R S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (19)

UNLOADING RAILCARS

This section provides comments when unloading caustic soda from railcars in three ways: 1) via the bottom outlet valve

(BOV) using gravity; 2) via the BOV using pad pressure; or 3) top unloaded through the well line using pad pressure.

Refer to Figure 2 for the various unloading arrangements present on a caustic railcar.

BOTTOM UNLOADING - GRAVITY

1. Verify the contents are liquid and at the desired unloading temperature. If not, see “Handling in Cold Weather.”

2. Vent the railcar – OxyChem recommends opening the railcar manway cover.

3. Refer to Figure 2A or 2B. Ensure the internal BOV is closed tightly. If a top operated BOV, the valve rod

which operates the bottom discharge valve has a handle on it which is located at the top of the railcar. The

handle can be reversed and serves as a cap in transit.

4. Remove the plug from the auxiliary valve, then attach an appropriate fitting and unloading line. A flexible

connection hose is recommended since a railcar will rise as it is unloading.

5. Check the downstream unloading line to see that all valves are in the proper position for unloading to storage.

6. Open the bottom auxiliary valve, then the internal BOV either by rotating the handle 90° if it is a bottom

operated BOV, or by turning the top operator to allow contents to begin flowing by gravity to the pump or tank.

If the BOV does not open upon application of light pressure, frozen caustic soda is probably present in the

bottom of the car. Application of steam to the BOV area via a steam lance, or hookup to the heat coils may be

necessary. See “Handling in Cold Weather.”

7. When the tank car is empty and the discharge pipe has completely drained, close the internal BOV and the

auxiliary valve.

8. Disconnect the unloading fittings and hose and install the plug tool tight in the auxiliary valve.

9. Close the manway cover and secure all bolts tool tight. Close the vent valve if open and install the plug tool

tight if removed.

10. Prepare the railcar for return.

Note: See Figure 3 for an example setup for Bottom Unloading using gravity feed to an unloading pump and then

to a storage tank.

U N L O A D I N G A N D H A N D L I N G C A U S T I C S O D A I N R A I L C A R S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (20)

20

BOTTOM UNLOADING – PAD PRESSURE

Compressed air can be used to increase the flow rate of caustic soda to storage or to transfer product without the

use of a pump. If compressed air is to be used, the prior section instructions for bottom unloading should be

modified as follows:

1. Close and secure the manway cover tool tight.

2. Remove the plug from the vent valve and connect the air supply piping and flexible hose to it.

3. Open the vent valve, and apply air pressure slowly to the railcar until there is a normal flow of liquid to the

storage tank. The pressure should be maintained until the railcar is completely empty. OxyChem recommends

use of 20-25 psig max. A drop in air pressure or the sound of air rushing through the unloading line indicates the

railcar is empty.

4. When the railcar is empty, shut off the air supply to the railcar and allow the residual air pad to vent

from the railcar either through the unloading line, or through the vent valve on the air system piping -

venting the pad from the railcar to a safe location.

5. Close the vent valve on the railcar.

6. Remove the air supply line and reinstall the plug tool tight.

TOP UNLOADING THROUGH THE EDUCTION (WELL) LINE – PAD PRESSURE

1. Verify the contents are liquid and at the desired unloading temperature. If not, see “Handling in Cold Weather.”

2. Refer to Figure 2C. Open the housing cover protecting the top unloading valves.

3. Remove the plug from the eduction valve, and using appropriate fittings, connect a flexible unloading hose. This

is necessary since the railcar will rise while being unloaded.

4. Remove the plug from the vent valve, and connect the air supply piping and flexible hose to it.

5. Open the eduction valve and any other valves necessary to the storage tank.

6. Open the vent valve, and apply air pressure slowly to the railcar until there is a normal flow of liquid to the

storage tank. The pressure should be maintained until the railcar is completely empty. OxyChem recommends

use of 20-25 psig max. A drop in air pressure or the sound of air rushing through the unloading line indicates

that the tank car is empty.

7. When the railcar is empty, shut off the air supply to the railcar and allow the residual air pad to vent

from the railcar either through the unloading line, or through the vent valve on the air system piping -

venting the pad from the railcar to a safe location.

8. When the railcar is at atmospheric pressure, close the eduction valve and disconnect the unloading line from

the railcar.

9. Close the vent valve and disconnect the air supply from the railcar.

10. If desired, open the manway cover to verify the railcar is empty. Do not enter the car to make an

inspection.

11. Replace both plugs in their respective valves tool tight, and secure the protective housing cover.

12. Prepare the railcar for return.

U N L O A D I N G A N D H A N D L I N G C A U S T I C S O D A I N R A I L C A R S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (21)

See Figure 4 for an example setup for Top Unloading to a storage tank. Care should be taken not to spill caustic

soda on the railcar, since it will cause damage to the paint and may endanger workers handling the empty railcar

on its return. Wash off any spilled or dripped caustic.

PREPARING AN EMPTY RAILCAR FOR RETURN

1. Ensure both top valves are closed and plugs are installed tool tight. Secure the cover over the

valves.

2. Close the manway cover taking care to ensure the gasket does not fall into the railcar, shift or fold.

Ensure all manway cover bolts are tool tight.

3. Disconnect any steam lines used to heat the railcar. Do not place any caps or closures on the railcar

steam pipes.

4. Make sure the bottom outlet valve (BOV) and auxiliary valve are closed, and the plug is installed tool tight.

Return the empty railcar promptly in accordance with the shipper’s instructions. The shipper’s routing

directions must be followed in all instances.

U N L O A D I N G A N D H A N D L I N G C A U S T I C S O D A I N R A I L C A R S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (22)

22

CARRIER RESPONSIBILITIES

OxyChem tank truck drivers have received instructions regarding equipment and delivery procedures. If an

OxyChem arranged carrier, delivering caustic soda to your plant, fails to adhere to the following guidelines,

please contact OxyChem so that corrective action can be taken.

Equipment

Equipment must meet Department of Transportation regulations, Code of Federal Regulations (CFR),

Title 49.

Tank Truck Specification

Tank trucks should meet the established DOT requirements for hauling liquid caustic soda.

Four(4) DOT “CORROSIVE” placards must be affixed to the cargo tank. One on each side.

Unloading Equipment

If unloading is by gravity to storage or customer’s unloading pump, no special equipment is needed.

If unloading is by truck-mounted pump, use only an all iron or stainless steel unit. The pump can be driven

by a tractor powered take-off or an auxiliary gasoline engine. Use at least a 2-inch pump line.

If unloading is by compressed air, the tank vessel must meet the DOT requirements of the CFR, Title 49.

The line used to supply air to the tank truck is required to be equipped with a pressure reducing valve, a

pressure relief valve, a pressure gauge and a block valve. The relief valve should be set at a maximum

pressure of 20 PSIG and the pressure reducing valve should be set at 2 to 3 pounds lower. Whether this

equipment is attached permanently to the tank or carried as an assembled unit to be attached at each

unloading, it should be properly maintained and periodically tested.

A 40 foot length of air hose is required if the customer’s air supply is used. When compressed air is not

available from the customer’s plant, trucks equipped with pumps or air compressors can be provided at the

customer’s request.

Unloading Lines

Unloading hoses must be constructed of material resistant to caustic soda. Hoses should be at least 2

inches in diameter and 15 to 30 feet in length.

Whether the unloading hose is fitted with a union, pipe flange, or a quick type coupler, the truck driver

should have available matching fittings and tools to facilitate a connection to a 2-inch or 3-inch threaded

pipe.

U N L O A D I N G C A U S T I C S O D A T A N K T R U C K S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (23)

TRUCK DRIVER RESPONSIBILITIES

Truck drivers must obtain permission to unload from the proper authorities and observe any special

instructions from the customer.

Truck drivers must wear the protective equipment required by OxyChem as listed under Protective

Equipment, (pg. 11) or by the customer, whichever is more inclusive, and at all times follow safe handling

practices. Customers must not allow truck drivers who do not meet these requirements to unload.

The following unloading procedures are recommended:

Check the operation of the safety shower and eyewash fountain. Purge water through each to remove rust that

may have accumulated.

If a shower and eyewash are not available, a water hose connected to a source of water is required. If

the valve on the line is not conveniently located near the unloading area, leave a stream of water flowing

during unloading.

Connect one end of the unloading hose to the customer’s storage tank fill line.

During cold weather and if facilities are provided, use steam to preheat the fill line, the unloading hose,

and, if needed, the truck outlet.

Check the unloading line to be sure that it is open.

Connect the unloading hose to the discharge outlet on the tank truck.

Start the pump or start pressurizing the tank, depending on the type of equipment used.

Open the valves on the truck discharge line.

Stand by until the truck cargo is completely unloaded.

If compressed air is used, allow the air to flush out the lines to the storage tank and then close and

disconnect the air supply.

U N L O A D I N G C A U S T I C S O D A T A N K T R U C K S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (24)

24

GENERAL CONSIDERATIONS

Caustic soda is a corrosive chemical which is normally handled in either steel, nickel, nickel alloys or

certain types of plastic equipment. The specific material will depend on the conditions under which the

material is being used. Temperature, solution concentration, location and safety considerations are all

important factors in equipment selection.

MATERIALS OF CONSTRUCTION

Carbon steel is the most commonly used material of construction for caustic soda at low to moderate

temperatures. The ideal storage temperature for caustic soda in carbon steel is 80 to 100°F. Temperatures

above 120°F will cause accelerated corrosion of the carbon steel and subsequent iron contamination of the

caustic soda (above 120°F, cracking can occur if concentrated caustic is processed in steel equipment that

has not been stress relieved). Where iron contamination or corrosion is unacceptable, epoxy lined carbon

steel, 316L and 304L stainless steels are recommended. 316L and 304L stainless is acceptable to 200°F.

At temperatures above 200°F, nickel is typically used but Monel®, Inconel®, or Hastelloy® can also be

used. Consult with the supplier about the working temperature range of a particular lining.

Plastics, such as polyethylene, polypropylene, PVC, and CPVC, can be used. They do not contribute to iron

contamination. They are chemically compatible with caustic soda so long as their maximum temperature

limitation is not exceeded. When using PVC or CPVC as the material of construction, use a glue that

does not contain silica as a filler. PVC and CPVC glues contain a filler (typically silica). Caustic soda

will attack the silica filler causing leaks to develop at the glue joints. The manufacturer of the tank, drum,

piping or equipment in question should be contacted to determine the exact limitations of the specific

plastic.

DANGER: Aluminum, copper, zinc, lead and their alloys (e.g., brass and bronze) are NOT

suitable for handling or storing caustic soda. Caustic soda readily attacks these materials.

STORAGE TANKS

Tanks can be either vertical or horizontal. They are usually fabricated from at least 1/4-inch steel plate. A

1/8-inch corrosion allowance should be included in the design. If iron contamination is a problem, tanks can

be fabricated from 304L or 316L stainless steel. If the tanks are large, it’s usually more economical to

fabricate a steel tank and line it with an epoxy coating. Plastic tanks are usually fabricated from

polypropylene or fiberglass reinforced plastics (FRP). Since caustic soda can attacks glass reinforcement

fibers of improperly constructed FRP tanks, care must be taken to ensure the FRP tanks are built with the

proper reinforcing materials, resins, catalysts, curing procedures and corrosion barriers.

The product discharge connection should be at least 4 inches above the bottom of the tank and the

drain connection should be at the lowest point in the tank. This will facilitate drainage during periodic

cleaning of the tank. Storage tanks should have a level indicating device for measuring liquid level.

Where heating is required, an external heat exchanger with a circulating pump or internal steam

heating coils are most commonly employed. The preferred materials for the coils are nickel, Monel®,

or Inconel®. Despite this, stainless steel is most commonly used because of cost considerations. At

high temperatures, stainless steel may crack. If it is necessary to insulate the storage tank, a two-inch layer

of polyurethane foam or cellular glass should be adequate.

Proper design of a storage system will include adequate containment in case of tank failure. State and local

regulatory authorities should always be consulted during the design phase of construction.

E Q U I P M E N T F O R H A N D L I N G C A U S T I C S O D A

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (25)

E Q U I P M E N T F O R H A N D L I N G C A U S T I C S O D A

TANK CLEANING AND PASSIVATION

Tank cleaning is dependent on the previously stored product. A tank that previously contained caustic soda

requires scale removal, wall thickness testing, rinsing, passivation, floor cleaning, and immediate filling. A

tank previously containing another product requires cleaning with an appropriate solvent or soap, as well as

the other steps mentioned above.

Scale removal is accomplished by blasting the walls with an abrasive such as sand or pecan shells. Abrasives

containing high percentages of metals are not recommended.

The wall thickness of the tank should be measured to ensure the tank has structural integrity for the

density of the product and the height of product in the tank.

Passivation requires permeation of the steel tank walls with caustic soda. This is usually accomplished by

spraying the cleaned walls with a hot solution of caustic soda. A temperatures of 100-140°F and solution

concentration of 5-20% are recommended. A standard recommendation would be spraying the walls for

2-4 hours with a 10% solution at 140°F. The larger the tank the longer it should be sprayed to

complete the passivation. Utilizing a hotter and stronger solutions will require less time for passivation.

One way to achieve the solution heat necessary is to dilute 50% caustic soda to 20%. The heat of

dilution will cause the caustic soda temperature to rise. Additional heat may be necessary to achieve

optimal solution temperatures. The coating of the tank walls is best accomplished with an elliptical

sprayer.

After passivation, the tank bottom must be cleaned out as well as possible. The quality of the initial

product stored in the tank will depend greatly upon the extent to which the tank bottom is cleaned of scale

abrasive compound. After spraying, a squeegee will need to be used to clean the tank bottom.

After cleaning, the tank should be filled with caustic soda as soon as possible. This will prevent the tank

walls from losing their passivation. If the tank cleaning is not completely successful, it may be necessary to

filter the initial product from the tank to remove any remaining particulate matter. This would require a 5-10

micron filter media housed in a unit that would be compatible with the temperature, pressure, and chemical.

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (26)

26

PIPING AND VALVES

Pipelines are usually at least two inches in diameter and constructed of Schedule 40 black iron or mild

steel with welded or flanged joints. Where disconnects are necessary, flanged joints are preferred to

facilitate maintenance. A safety flange guard of wrap-around polypropylene is recommended for all

flanged joints. This will protect against spraying in case a gasket leaks.

Proper pipeline design includes an adequate pitch to permit complete draining. Avoid any loops or pockets.

Lines should also include water or air connections for purging after use.

Where slight iron contamination is unacceptable, CPVC, polypropylene, polypropylene-lined steel, and

Teflon® lined steel pipe are suitable materials. Pay special attention to suitable operating temperatures and

pressures with these materials.

Ductile iron, cast steel, stainless steel, Alloy 20, and Teflon®-lined quarter-turn plug or ball valves are

recommended for caustic soda service. Various other types of valves can also be used; however, keep in

mind that less elaborate fittings provide better reliability in this service.

PUMPS

Centrifugal pumps of stainless steel or Alloy 20 construction, with either double mechanical seals or a

deep packing gland, is recommended. Packing material should be Teflon® impregnated, caustic resistant

fibers, or equivalent. To avoid seals altogether, magnetically coupled pumps could be used.

The pump location should receive careful consideration. For ease of operation, keep the suction lines as

short as possible. A recirculating line will help prevent excess wear on the pump and, in many cases, can

assist in controlling flow rates.

The pump seal area should have a liquid impervious shield installed.

METERS

Caustic soda solutions can be metered through standard rotameters having non-glass tubes and nickel or

stainless steel floats. Magnetic, Coriolis or orifice-type meters are preferred for strong, hot solutions. They

should be made of corrosion resistant materials such as stainless steel, alloy 20, Monel®, or nickel.

E Q U I P M E N T F O R H A N D L I N G C A U S T I C S O D A

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (27)

T Y P I C A L S T O R A G E T A N K I N S T A L L A T I O N

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (28)

28

T A B L E 1 D E N S I T Y A N D N A O H C O N T E N T O F M E M B R A N E G R A D E C A U S T I C S O D A S O L U T I O N S A T 6 0 ° F

WT% NaOH

% Na2O

SPECIFIC GRAVITY

DEGREES BAUMÉ

[AM STD] NaOH

G/L NaOH

LB/GAL NaOH

LB/CU FT DENSITY LB/GAL

DENSITY LB/CU FT

1.0 0.775 1.0120 1.706 10.118 0.084 0.631 8.437 63.113

2.0 1.550 1.0230 3.259 20.457 0.171 1.277 8.529 63.804 3.0 2.325 1.0342 4.782 31.019 0.259 1.935 8.622 64.497 4.0 3.100 1.0453 6.274 41.803 0.349 2.608 8.715 65.191 5.0 3.874 1.0564 7.736 52.811 0.440 3.295 8.807 65.885 6.0 4.649 1.0676 9.170 64.042 0.534 3.995 8.900 66.581 7.0 5.424 1.0787 10.580 75.496 0.630 4.710 8.993 67.277 8.0 6.199 1.0899 11.960 87.174 0.727 5.438 9.087 67.973 9.0 6.974 1.1010 13.310 99.076 0.826 6.181 9.180 68.670 10.0 7.748 1.1122 14.630 111.210 0.927 6.937 9.273 69.367 11.0 8.523 1.1234 15.930 123.550 1.031 7.707 9.366 70.063 12.0 9.298 1.1345 17.200 136.130 1.136 8.492 9.459 70.759 13.0 10.080 1.1457 18.440 148.920 1.242 9.290 9.552 71.455 14.0 10.850 1.1569 19.660 161.930 1.351 10.110 9.645 72.150 15.0 11.630 1.1680 20.850 175.170 1.461 10.930 9.738 72.845

16.0 12.400 1.1791 22.030 188.630 1.573 11.770 9.830 73.539 17.0 13.180 1.1902 23.170 202.300 1.687 12.620 9.923 74.231 18.0 13.950 1.2013 24.300 216.200 1.803 13.490 10.020 74.922 19.0 14.730 1.2124 25.400 230.310 1.921 14.370 10.110 75.612 20.0 15.500 1.2234 26.480 244.640 2.040 15.260 10.200 76.300 21.0 16.280 1.2344 27.530 259.180 2.162 16.170 10.300 76.987 22.0 17.050 1.2454 28.570 273.940 2.285 17.090 10.390 77.672 23.0 17.830 1.2563 29.590 288.910 2.409 18.030 10.480 78.355 24.0 18.600 1.2672 30.580 304.090 2.536 18.970 10.570 79.035 25.0 19.370 1.2781 31.550 319.470 2.664 19.930 10.660 79.713 26.0 20.150 1.2889 32.510 335.070 2.794 20.910 10.750 80.389 27.0 20.920 1.2997 33.440 350.870 2.926 21.890 10.840 81.062 28.0 21.700 1.3105 34.350 366.870 3.060 22.890 10.930 81.731 29.0 22.470 1.3212 35.250 383.070 3.195 23.900 11.020 82.398 30.0 23.250 1.3317 36.120 399.450 3.331 24.920 11.110 83.057 31.0 24.020 1.3424 36.980 416.070 3.470 25.960 11.200 83.722 32.0 24.800 1.3529 37.830 432.860 3.610 27.010 11.280 84.379 33.0 25.570 1.3634 38.650 449.850 3.751 28.070 11.370 85.033 34.0 26.350 1.3738 39.450 467.010 3.895 29.140 11.460 85.681 35.0 27.120 1.3842 40.240 484.370 4.039 30.220 11.540 86.327 36.0 27.900 1.3944 41.020 501.910 4.186 31.310 11.630 86.968 37.0 28.670 1.4046 41.770 519.630 4.333 32.420 11.720 87.605 38.0 29.450 1.4148 42.510 537.520 4.482 33.530 11.800 88.237 39.0 30.220 1.4248 43.230 555.590 4,633 34.660 11.880 88.864 40.0 31.000 1.4348 43.940 573.830 4.785 35.800 11.970 89.487 41.0 31.770 1.4447 44.640 592.240 4.939 36.950 12.050 90.105 42.0 32.550 1.4545 45.310 610.810 5.094 38.110 12.130 90.717 43.0 33.320 1.4643 45.980 629.530 5.250 39.270 12.210 91.324 44.0 34.100 1.4739 46.630 648.420 5.407 40.450 12.290 91.926 45.0 34.870 1.4835 47.260 667.450 5.566 41.640 12.370 92.522 46.0 35.650 1.4930 47.880 686.640 5.726 42.840 12.450 93.113 47.0 36.420 1.5023 48.480 705.970 5.887 44.040 12.530 93.697 48.0 37.200 1.5116 49.080 725.440 6.049 45.260 12.610 94.275 49.0 37.970 1.5208 49.650 745.040 6.213 46.480 12.680 94.847

50.0 38.740 1.5298 50.220 764.780 6.377 47.710 12.760 95.412 51.0 39.520 1.5388 50.770 784.640 6.543 48.950 12.830 95.971 52.0 40.290 1.5476 51.310 804.630 6.710 50.200 12.910 96.523

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (29)

T A B L E 2 D E N S I T Y A N D N A O H C O N T E N T O F D I A P H R A G M G R A D E C A U S T I C S O D A S O L U T I O N S A T 6 0 ° F

WT% NaOH

% Na2O

% NaCl

SPECIFIC GRAVITY

DEGREES BAUMÉ

[AM STD] NaOH

G/L NaOH

LB/GAL NaOH

LB/CU FT DENSITY LB/GAL

DENSITY LB/CU FT

1.0 0.775 0.020 1.0121 1.726 10.120 0.084 0.631 8.438 63.122 2.0 1.550 0.040 1.0233 3.300 20.463 0.171 1.277 8.532 63.823 3.0 2.325 0.060 1.0346 4.842 31.032 0.259 1.936 8.626 64.525 4.0 3.100 0.080 1.0459 6.351 41.827 0.349 2.610 8.719 65.227 5.0 3.874 0.100 1.0571 7.829 52.846 0.441 3.297 8.813 65.930 6.0 4.649 0.120 1.0684 9.282 64.095 0.535 3.999 8.908 66.636 7.0 5.424 0.140 1.0797 10.710 75.568 0.630 4.714 9.002 67.341 8.0 6.199 0.160 1.0911 12.100 87.269 0.728 5.444 9.096 68.047 9.0 6.974 0.180 1.1024 13.460 99.195 0.827 6.188 9.191 68.752 10.0 7.748 0.200 1.1137 14.800 111.350 0.928 6.946 9.285 69.458 11.0 8.523 0.220 1.1250 16.110 123.730 1.032 7.718 9.379 70.164 12.0 9.298 0.240 1.1363 17.390 136.340 1.137 8.505 9.474 70.870 13.0 10.080 0.260 1.1476 18.650 149.170 1.244 9.305 9.568 71.575 14.0 10.850 0.280 1.1589 19.880 162.220 1.353 10.120 9.662 72.279 15.0 11.630 0.300 1.1702 21.090 175.500 1.464 10.950 9.756 72.983 16.0 12.400 0.320 1.1815 22.270 189.000 1.576 11.790 9.850 73.685 17.0 13.180 0.340 1.1927 23.430 202.730 1.691 12.650 9.944 74.387 18.0 13.950 0.360 1.2040 24.560 216.680 1.807 13.520 10.040 75.088 19.0 14.730 0.380 1.2152 25.670 230.840 1.925 14.400 10.140 75.787 20.0 15.500 0.400 1.2263 26.760 245.230 2.045 15.300 10.230 76.485

21.0 16.280 0.420 1.2375 27.830 259.830 2.167 16.210 10.320 77.180 22.0 17.050 0.440 1.2486 28.870 274.650 2.291 17.140 10.410 77.874 23.0 17.830 0.460 1.2597 29.900 289.690 2.416 18.080 10.510 78.566 24.0 18.600 0.480 1.2708 30.900 304.930 2.543 19.030 10.600 79.255 25.0 19.370 0.500 1.2818 31.880 320.400 2.672 19.990 10.690 79.943

26.0 20.150 0.520 1.2928 32.840 336.070 2.803 20.970 10.780 80.628 27.0 20.920 0.540 1.3037 33.780 351.940 2.935 21.960 10.870 81.310 28.0 21.700 0.560 1.3146 34.700 368.020 3.069 22.960 10.960 81.988 29.0 22.470 0.580 1.3254 35.600 384.310 3.205 23.980 11.050 82.665 30.0 23.250 0.600 1.3362 36.490 400.800 3.342 25.010 11.140 83.338 31.0 24.020 0.620 1.3470 37.350 417.490 3.482 26.050 11.230 84.007 32.0 24.800 0.640 1.3576 38.200 434.370 3.622 27.100 11.320 84.673 33.0 25.570 0.660 1.3683 39.030 451.450 3.765 28.170 11.410 85.335 34.0 26.350 0.680 1.3788 39.840 468.720 3.909 29.240 11.500 85.994 35.0 27.120 0.700 1.3893 40.630 486.170 4.054 30.330 11.590 86.648 36.0 27.900 0.720 1.3997 41.410 503.820 4.201 31.430 11.670 87.299 37.0 28.670 0.740 1.4101 42.170 521.640 4.350 32.540 11.760 87.944 38.0 29.450 0.760 1.4204 42.920 539.650 4.500 33.670 11.850 88.586 39.0 30.220 0.780 1.4306 43.640 557.830 4.652 34.800 11.930 89.223 40.0 31.000 0.800 1.4407 44.360 576.190 4.805 35.950 12.020 89.854 41.0 31.770 0.820 1.4508 45.050 594.710 4.959 37.100 12.100 90.481 42.0 32.550 0.840 1.4607 45.740 613.400 5.115 38.270 12.180 91.103 43.0 33.320 0.860 1.4706 46.400 632.260 5.272 39.440 12.270 91.720 44.0 34.100 0.880 1.4804 47.060 651.270 5.431 40.630 12.350 92.330 45.0 34.870 0.900 1.4901 47.690 670.440 5.591 41.830 12.430 92.935

46.0 35.650 0.920 1.4997 48.320 689.760 5.752 43.030 12.510 93.535 47.0 36.420 0.940 1.5092 48.930 709.220 5.914 44.250 12.590 94.129 48.0 37.200 0.960 1.5187 49.520 728.830 6.078 45.470 12.670 94.716 49.0 37.970 0.980 1.5280 50.100 748.580 6.242 46.700 12.740 95.297 50.0 38.740 1.000 1.5372 50.670 768.460 6.408 47.940 12.820 95.872 51.0 39.520 1.000 1.5506 51.490 790.690 6.594 49.330 12.930 96.711 52.0 40.290 1.000 1.5604 52.070 811.250 6.765 50.610 13.010 97.317

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (30)

30

T A B L E 3 S P E C I F I C H E A T S O F C A U S T I C S O D A I N B T U / l b · ° F

WT% NaOH

TEMPERATURE °F

32 40 50 60 80 100 120 140 160 180 200 220 240 260 280 300

0 1.004 1.003 1.001 0.999 0.998 0.997 0.998 0.999 1.000 1.002 1.004 - - - - -

2 0.965 0.967 0.968 0.969 0.972 0.974 0.977 0.978 0.980 0.983 0.986 - - - - -

4 0.936 0.940 0.943 0.946 0.951 0.954 0.957 0.960 0.962 0.965 0.966 - - - - -

6 0.914 0.920 0.924 0.928 0.933 0.938 0.941 0.944 0.946 0.948 0.950 - - - - -

8 0.897 0.902 0.907 0.911 0.918 0.923 0.927 0.930 0.932 0.934 0.936 - - - - -

10 0.882 0.888 0.893 0.897 0.905 0.911 0.916 0.918 0.920 0.922 0.923 - - - - -

12 0.870 0.877 0.883 0.887 0.894 0.901 0.906 0.909 0.911 0.912 0.913 - - - - -

14 0.861 0.868 0.874 0.879 0.886 0.892 0.897 0.901 0.903 0.903 0.904 - - - - -

16 0.853 0.860 0.866 0.871 0.880 0.886 0.891 0.894 0.896 0.897 0.897 - - - - -

18 0.847 0.854 0.860 0.865 0.873 0.880 0.885 0.888 0.890 0.891 0.891 - - - - -

20 0.842 0.848 0.854 0.859 0.868 0.875 0.880 0.884 0.886 0.886 0.887 - - - - -

22 0.837 0.844 0.849 0.854 0.863 0.870 0.876 0.880 0.882 0.882 0.883 - - - - -

24 - 0.839 0.844 0.849 0.858 0.866 0.873 0.877 0.879 0.879 0.880 - - - - -

26 - 0.835 0.840 0.845 0.854 0.863 0.869 0.874 0.875 0.876 0.876 - - - - -

28 - 0.830 0.836 0.841 0.850 0.859 0.866 0.870 0.872 0.872 0.873 - - - - -

30 - 0.826 0.832 0.837 0.846 0.855 0.862 0.866 0.868 0.869 0.869 - - - - -

32 - 0.822 0.828 0.833 0.842 0.850 0.857 0.862 0.863 0.864 0.864 - - - - -

34 - - 0.823 0.828 0.837 0.845 0.852 0.856 0.857 0.858 0.858 - - - - -

36 - - 0.819 0.824 0.832 0.840 0.845 0.849 0.850 0.851 0.851 - - - - -

38 - - 0.816 0.820 0.827 0.833 0.837 0.841 0.842 0.842 0.843 - - - - -

40 - - 0.812 0.815 0.821 0.826 0.829 0.831 0.832 0.832 0.832 - - - - -

42 - - 0.807 0.809 0.813 0.816 0.819 0.819 0.820 0.820 0.820 - - - - -

44 - - - 0.802 0.804 0.806 0.807 0.807 0.807 0.806 0.804 - - - - -

46 - - - 0.793 0.794 0.795 0.794 0.794 0.793 0.791 0.789 - - - - -

48 - - - - 0.783 0.782 0.781 0.780 0.779 0.777 0.776 - - - - -

50 - - - - 0.771 0.769 0.768 0.767 0.765 0.765 0.764 0.763 0.762 0.762 0.761 0.761

52 - - - - 0.759 0.757 0.756 0.754 0.753 0.752 0.751 0.749 0.748 0.747 0.746 0.745

54 - - - - 0.746 0.744 0.741 0.739 0.739 0.738 0.737 0.735 0.733 0.731 0.730 0.728

56 - - - - 0.733 0.730 0.728 0.726 0.724 0.723 0.722 0.721 0.719 0.717 0.715 0.713

58 - - - - - 0.719 0.717 0.715 0.713 0.711 0.709 0.707 0.705 0.703 0.702 0.700

60 - - - - - 0.706 0.705 0.703 0.701 0.699 0.697 0.696 0.693 0.691 0.690 0.688

62 - - - - - - 0.694 0.692 0.690 0.688 0.687 0.685 0.683 0.681 0.679 0.677

64 - - - - - - 0.684 0.682 0.681 0.679 0.677 0.675 0.673 0.671 0.670 0.668

66 - - - - - - 0.675 0.673 0.671 0.669 0.668 0.666 0.664 0.662 0.660 0.658

68 - - - - - - - 0.663 0.662 0.660 0.658 0.656 0.655 0.653 0.651 0.649

70 - - - - - - - 0.655 0.653 0.651 0.649 0.647 0.646 0.644 0.642 0.640

72 - - - - - - - - 0.645 0.643 0.641 0.639 0.637 0.635 0.634 0.632

73 - - - - - - - - - 0.639 0.637 0.635 0.633 0.631 0.630 0.628

74 - - - - - - - - - 0.635 0.633 0.631 0.629 0.628 0.626 0.624

74.5 - - - - - - - - - 0.633 0.631 0.629 0.627 0.626 0.624 0.622

76 - - - - - - - - - 0.628 0.627 0.625 0.623 0.621 0.619 0.617

78 - - - - - - - - - - 0.620 0.618 0.616 0.615 0.613 0.611

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (31)

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (32)

32

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (33)

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (34)

34

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (35)

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (36)

36

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (37)

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (38)

38

GRAPH 8

Thermal Conductivity of Aqueous Caustic Soda Solutions

0.36

Therm

al C

onduct

ivity

– B

TU

·ft / hr·

ft2·°

F

0.32

0.33

0.34

0.35

0.37

0.39

0.38

0.41

0.40

0.42

0 10 20 30 40 50 60 70

Percent NaOH by weight

190°F

100°F

90°F

70°F

50°F

30°F

170°F

130°F

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (39)

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (40)

40

HOW TO DILUTE CAUSTIC SODA SOLUTIONS

Sometimes it is necessary to dilute caustic soda before it is used, or when the potential for freezing exists. A

procedure for calculating the amount of concentrated caustic and water required is given below.

DILUTING A SOLUTION

Example: To dilute 3,000 gallons of 50% NaOH to a 20% solution. How much water is necessary

to accomplish this task?

Solution: The dilution can be simplified by using the following formula:

D = V [A (B - C) / C] where:

A = Specific gravity of strong solution

B = Concentration of strong solution (%NaOH)

C = Concentration of desired solution(%NaOH)

D = Volume of water to be added

V = Volume of strong solution

(The specific gravity of 50% Diaphragm NaOH is 1.5372 taken from Table 2)

Therefore:

D = 3,000 [(1.5372 (50 - 20) / 20)]

D = 6,917 gallons

Result: It will take 6,917 gallons of water to dilute 3,000 gallons of 50% NaOH to a 20% solution.

VOLUME OF FINAL SOLUTION

It should be noted that when diluting caustic soda, volumes are not additive. Therefore, in the previous

example, the final volume of the solution would not be 6,917 gallons of water + 3,000 gallons of 50% NaOH =

9,917 total gallons. The actual volume will be slightly less. To calculate the final volume, the water and

caustic soda must be converted to a weight basis, and then divided by the density of the resulting solution.

D I L U T I O N C A L C U L A T I O N S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (41)

DILUTION GRAPH

Graph 10 on the next page can also be used to determine approximate volumes of 50% NaOH and water

necessary to achieve a particular dilution. For example, you want to produce 3,000 gallons of a 25% NaOH

solution and want to know how much water and 50% NaOH are needed to accomplish this goal.

Using the chart, start on the bottom axis at the 3,000 gallon line. Proceed upward until you intersect the first

25% line on the bottom half of the graph. From the intersection point go to the right and left axes to determine

the volume and weight of water needed. In this case the volume is read at 1,920 gallons and the weight at

16,000 pounds.

Then continue upward until you intersect the 25% line at the top of the graph. Again from the intersection

point go to the left and right axes to determine the volume and weight of 50% NaOH needed. In this case the

volume is read at 1,248 gallons and the weight at 16,000 pounds.

Therefore, it would take 1,248 gallons of 50% NaOH to be added to 1,920 gallons of water to produce

3,000 gallons of a 25% solution.

D I L U T I O N C A L C U L A T I O N S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (42)

42

D I L U T I O N C A L C U L A T I O N S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (43)

DETERMINATION OF THE TOTAL ALKALINITY OF CAUSTIC SODA

PURPOSE AND THEORY

The accurate determination of the total alkalinity value for caustic soda is important. It is used to calculate the

weight of product shipped and ultimately the amount of money billed for the shipment.

Total alkalinity in caustic soda products is determined by titration of a sample with a standardized solution of 1N

hydrochloric acid. Modified methyl orange indicator is used to determine the titration endpoint.

This procedure is based on ASTM E291-09, Standard Test Methods for Chemical Analysis of Caustic Soda

and Caustic Potash, sections 8 through 14.

APPARATUS

100 ml Buret; Class A Volumetric, Fisher Scientific Cat #: 03-775 or equivalent.

Analytical Balance; capable of weighing to 0.001 grams.

250 ml Erlenmeyer Flasks; wide mouth, Fisher Cat#: 10-090B or equivalent.

Magnetic Stirrer; Fisher Cat#: 14-493-120S or equivalent.

Magnetic stirring bars; 1 1/2” x 5/16” dia. Fisher Cat#: 14-511-64 or equivalent.

REAGENTS

1N Hydrochloric Acid; measure 83.0 ml of ACS Reagent grade concentrated hydrochloric acid into a

graduated cylinder and transfer it to a one liter volumetric flask containing approximately 500 ml of deionized

water. Dilute to volume with additional water, mix well and store in a tightly closed container. A prepared

solution of 1N HCl can also be purchased (Fisher Scientific Cat# SA48-20 or equivalent). Hydrochloric

Acid must be standardized to ±0.0001N before use.

Sodium Carbonate; anhydrous, volumetric grade (EM Science Cat#: 6394-2 or equivalent.) Dry at

250°C in a platinum or porcelain crucible for 4 hours. Store in a desiccator.

Modified methyl orange indicator; dissolve 0.14 grams of methyl orange (Fisher Cat#: M216- 25)

and 0.12 grams of Xylene Cyanole FF (Fisher Cat#: BP565- 10) in deionized water and dilute to 100 ml.

Water, Deionized & Carbon Dioxide free; boil and cool the deionized water or purge it with

nitrogen for two hours.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (44)

44

SAFETY

Refer to the SDS for the proper handling procedures for each of the chemicals listed in this procedure.

Caustic soda is a strong base. Hydrochloric acid is a strong acid. These chemicals are

corrosive to body tissue and can cause immediate and severe burns to eyes. Wear proper

gloves, proper eye protection and other protective clothing when handling these chemicals.

PROCEDURE

A. STANDARDIZATION OF 1N HYDROCHLORIC ACID

1. Weigh 4.2 grams of sodium carbonate to the nearest 0.0001 gram into a weighing dish. Carefully

transfer to an Erlenmeyer flask. Add 75 ml of deionized water and swirl to dissolve. Add three drops

of the modified methyl orange indicator and titrate with the HCl solution to a steel gray color change.

2. The following formula is used to calculate the normality of the HCl.

Let:

N = Normality of HCl

W = Weight (g) of Na2CO3 used

V = Volume (ml) of HCl required to endpoint. Milliequivalent weight of Na2CO3 = 0.053

N = W / V × 0.053

Determine the normality by averaging the result of at least three titrations.

B. ANALYSIS

1. In a clean, dry Erlenmeyer flask, accurately weigh, to the nearest 0.001 grams, 6 to 7 grams of 50%

NaOH. Weighing should be performed as rapidly as possible.

2. Immediately add 50 ml of deionized water, making sure the sides of the beaker are washed down.

3. Add 3 to 4 drops of modified methyl orange indicator and carefully add the magnetic stirring bar.

4. Titrate the sample to a steel gray color with 1N HCl. Samples should be titrated as soon as possible to

avoid pick up of carbon dioxide from the air.

5. Record the volume of acid required to reach this color. Estimate the buret reading to the nearest

0.02 ml.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (45)

C. CALCULATIONS

The following are formulas used to calculate total alkalinity.

Let:

W = Weight (g) of sample titrated N = Normality of HCl

V = Volume (ml) of HCl required Milliequivalent wt. of Na2O = 0.03099

%Na2O = (V) (N) (0.03099)(100)

W

%NaOH = 1.2907 (%Na2O)

EXAMPLE

6.530 grams of caustic soda required the addition of 81.77 ml of 1.0011N HCl to reach the modified

methyl orange endpoint.

%Na2O = (V) (N) (0.03099)(100)

W

%Na2O = (81.77) (1.0011) (3.099)

6.530

%Na2O = 38.85%

%NaOH = (1.2907) (38.85)

%NaOH = 50.14%

QUALITY ASSURANCE

With each batch of samples being analyzed, at least one of the samples should be analyzed in duplicate. On a

regular basis, samples that have been previously analyzed for total alkalinity should be reanalyzed and the

results compared.

Alkalinity values obtained for each sample should be compared with OxyChem specifications for that product.

Hydrochloric acid should be restandardized at least monthly.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (46)

46

DETERMINATION OF SODIUM HYDROXIDE IN CAUSTIC SODA

PURPOSE AND THEORY

The sodium hydroxide content of caustic soda is determined by adding barium chloride to a prepared

sample and titrating with 1 N HCl to the phenolphthalein end point. The results are reported as percent

NaOH on a sample weight basis.

Even with the utmost care, the separate determination of total alkalinity (previous method) and hydroxide

alkalinity often provides significant differences. This difference is then typically attributed to the presence of

carbonate. It has been found that separate titrations for total alkalinity and hydroxide alkalinity, or dual end-

point titrations that attempt to quantify total and hydroxide alkalinity in a single procedure, often provide

results for carbonate that are many times higher than the actual carbonate content of the material.

Although the method for hydroxide alkalinity is included here, because the usual carbonate content of caustic

soda is very low, we suggest the use of the method for total alkalinity alone. The carbonate content is

typically as low as or lower than the measurement error inherent in the analytical methods. As an alternative,

we suggest the use of the method for total alkalinity, the method for sodium carbonate determination (next

method in this handbook), and a calculation for hydroxide alkalinity as shown in ASTM E291-09, Standard

Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash, section 12.

APPARATUS

100 ml Buret; Class A Volumetric, Fisher Scientific Cat #: 03-775 or equivalent.

Analytical Balance; capable of weighing to 0.001 grams.

250 ml Erlenmeyer Flasks; wide mouth, Fisher Cat#:10-090B or equivalent.

Magnetic Stirrer; Fisher Cat#: 14- 493-120S or equivalent.

Magnetic stirring bars; 1-1/2” x 5/16” dia. Fisher Cat#: 14-511-64 or equivalent.

REAGENTS

1N Hydrochloric Acid; the preparation of this reagent is described in the method for:

“Determination of Total Alkalinity”.

1% Phenolphthalein Indicator; dissolve one gram of phenolph­thalein (Aldrich Cat#: 10,594-5 or

equivalent) in 100 ml of methanol.

10% Barium Chloride; Dissolve 120 g of reagent grade BaCl2.2H2O (Fisher Cat#: B34-500) in 880

ml of deionized water.

Water, Deionized & Carbon Dioxide free; boil and cool the deionized water or purge it with

nitrogen for two hours.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (47)

SAFETY

Refer to the SDS for the proper handling procedures for each of the chemicals listed in this

procedure. Caustic soda is a strong base. Hydrochloric acid is a strong acid. These

chemicals are corrosive to body tissue and can cause immediate and severe burns to eyes.

Wear proper gloves, proper eye protection and other protective clothing when handling these

chemicals. Barium chloride is highly toxic. Avoid inhaling barium chloride dust.

PROCEDURE

STANDARDIZATION OF 1N HYDROCHLORIC ACID

Standardization procedure is described in the method for: “Determination of Total Alkalinity”.

ANALYSIS

1. In a clean, dry Erlenmeyer flask, accurately weigh, to the nearest 0.001 grams, 6 to 7 grams of 50 NaOH.

Weighing should be performed as rapidly as possible.

2. Immediately add 100 ml of barium chloride solution, making sure the sides of the beaker are washed down.

3. Add 3 to 4 drops of phenolphthalein indicator and carefully add the magnetic stirring bar.

4. Titrate the sample with 1N HCl until the pink color changes to water white. The sample should be titrated as

soon as possible to avoid pick up of carbon diox­ide from the air.

5. Record the volume of acid required to reach this color, estimating the buret reading to the nearest

0.02 ml.

CALCULATIONS

The following are formulas used to calculate %NaOH.

Let:

W = Weight (g) of sample titrated

N = Normality of HCl

V = Volume (ml) of HCl required Milliequivalent wt. of NaOH = 0.04000

%NaOH = (V) (N) (0.04000) (100)

W

EXAMPLE

6.467 grams of caustic soda required the addition of 80.85 ml of 1.0020N HCl to reach the

phenolphthalein endpoint.

%NaOH = (V) (N) (0.04000) (100)

W

%NaOH = (80.85) (1.0020) (4.000)

6.467

%NaOH = 50.11%

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (48)

48

QUALITY ASSURANCE

For each batch of samples being analyzed, at least one of the samples should be analyzed in duplicate. On

a regular basis, samples that have been previously analyzed for total alkalinity should be reanalyzed and

the results compared. Alkalinity values obtained for each sample should be compared with OxyChem

specifications.

Hydrochloric acid should be restandardized at least monthly.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (49)

DETERMINATION OF SODIUM CARBONATE IN CAUSTIC SODA

(Gravimetric)

PURPOSE AND THEORY

The sodium carbonate content of a sample of caustic soda is determined by a direct gravimetric method.

The method involves acidification of the caustic soda sample with dilute sulfuric acid, boiling, and weighing

the carbon dioxide evolved. Accurate results can be obtained when the sodium carbonate content is 0.01%

or greater. This method should be used to analyze samples of liquid caustic soda containing 0.01% to

0.25% Na2CO3.

This procedure is based on ASTM E291-09, Standard Test Methods for Chemical Analysis of Caustic Soda

and Caustic Potash, sections 25 through 33. Although it is included as a reference for anyone who may wish

to perform the analysis, it should be noted that the procedure is rather lengthy, may show poor precision and is

susceptible to error because of air intrusion into the apparatus.

OxyChem typically utilizes a carbon analyzer in inorganic mode for the rapid and precise determination of

carbonate content of caustic soda. For further information regarding the carbon analyzer method, please

contact Technical Service.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (50)

50

APPARATUS

See the CO2 train sketch on the previous page. Air for sweep is drawn in through “A.” This air must be

scrubbed free of CO2. The ground-glass jointed tube fitted into the top of “A” should be packed with 8-20

mesh ascarite with a layer of anhydrous granular copper sulfate on top.

U-tube “D”

Add a few glass beads and 5 to 10 ml of concentrated H2SO4. The acid takes up the bulk of the moisture

passing through condenser “C” and should be changed often depending on frequency of use.

U-tube “E”

Pack with dehydrated copper sulfate pumice. This packing material is prepared by soaking pulverized

pumice having the grain size of wheat in saturated copper sulfate solution drying at 150-180oF. The

product must be kept in a well stoppered bottle.

U-tube “F”

Pack with anhydrous magnesium perchlorate. This removes all final traces of moisture carried through

the system.

Ascarite - Absorbing Tower “G”

Pack inside tube with 8-20 mesh ascarite. Over the top layer add about 0.25 inch of magnesium pechlorate

and cover with absorbent cotton. The cotton will prevent loss of weight due to carry-over of dust particles. After

tower is packed, it should be hooked into the system and swept with CO2-free air for a period of 15 to 20

minutes.

U-Tube “H”

Pack with 8-20 mesh ascarite.

REAGENTS

Sulfuric Acid; 12 N with 27.8 g. FeSO4.7H2O per liter.

Sulfuric Acid, concentrated.

Ascarite II; 8-20 mesh (sodium hydroxide coated silica.)

Magnesium Perchlorate, anhydrous.

Copper (II) Sulfate, anhydrous. Water, Deionized & Carbon Dioxide free; boil and cool the deionized

water or purge it with nitrogen for two hours.

SAFETY

Caustic soda as dust or mist is intensely irritating to the respiratory system, skin, and eyes.

Become familiar with the first aid measures recommended in this handbook.

When preparing 12 N sulfuric acid, the concentrated acid must be poured slowly into water with

constant stirring.

Wear safety glasses with side shields when handling caustic soda samples or acid solutions.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (51)

PROCEDURE

1. Sample Preparation

50% liquid caustic soda will solidify at 54oF. If the sample is solidified at the time of analysis, it may be thawed out by

placing the container in hot water until no solids are present. The lip of the bottle may be wiped before the sample is

poured into a weighing bottle.

Carbonate and moisture pickup should be avoided by rapid sample handling.

In all cases, samples for carbonate analysis should be the first taken from the sample bottle to minimize carbon

dioxide pickup from the atmosphere.

2. Analysis

The train must be conditioned daily before any samples are run. This is done by making a regular determination

using a sample that contains carbonate. Following this, a blank should be run on the train to make sure that the

train is leak free. This is done by making a regular determination but omitting the sample. If the ascarite weighing

tower gains more than 0.2 mg in weight during the blank run, the train probably has a leak.

After the train has been conditioned and found to be leak free, the samples are run as follows:

1. Two absorbing towers (G) must be conditioned and weighed prior to analysis. These will be called G1 and G2 in the

procedure. The use of two towers will enable the analyst to conserve time when performing more than one analysis.

2. Weigh a sample of at least 20g. (50% basis) or large enough to contain 5 mg of CO2 into a flask “B” using an

analytical balance. Add 4 or 5 glass beads and 80 ml of CO2-free deionized water and immediately place the

flask into its proper position in the train.

3. Add 50 ml of 12 N sulfuric acid to funnel “A.”

4. Place tared tower G1 between U-tubes “F” and “H.”

5. Open the system starting at U-tube “H” and working back to “D.”

6. Open cock on funnel “A” and allow acid to run into flask “B” and immediately hook vacuum line to tube “H.”

Adjust the flow of air to 4 bubbles per second through the tip of the stem of funnel “A.”

7. Apply heat to flask “B” and bring to a boil. Hold “B” contents to boiling point for 3 minutes and remove heat.

8. Sweep the system for 20 minutes. While this is being done, the next sample can be weighed into another flask (B),

and the beads and distilled water added. This flask is then stoppered and set aside until needed.

9. At the end of 20 minutes, the vacuum line is removed tower G1 is shut off and removed and tower G2 placed

into position. The cock on funnel “A” is closed and 50 ml of 12 N sulfuric acid is again added to funnel “A”.

10. Flask “B” is removed, the stem of funnel “A” is washed down with deionized water and the new sample is

placed into position.

11. Tower G2 is opened and the pro­cedure is repeated beginning at Step 6.

12. When G1 is removed from the train, a period of 20 minutes will condition the sample for weighing. During this

20 minute sweep time, another sample is prepared and tower G1 is reweighed in order to determine the

weight of CO2 found in the first sample. Tower G1 is then ready for Run No. 3.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (52)

52

CALCULATIONS

Report results as percent Na2CO3 calculated to the nearest 0.01.

Let:

W(CO2) = Weight of CO2 evolved

W(S) = Weight of Sample

%Na2CO3 = W(CO2) (2.409) (100)

W(S)

Note: Molecular weight of Na2CO3 / Molecular weight of CO2 = 106 / 44 = 2.409

EXAMPLE

If a 25 gram sample was used and 0.0125 gram of CO2 was absorbed in tower “G”, then:

%Na2CO3 = (0.0125) (2.409) (100)

25

%Na2CO3 = 0.12%

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (53)

DETERMINATION OF SODIUM CHLORIDE IN CAUSTIC SODA

PURPOSE AND THEORY

Chloride is a contaminant in all grades of caustic soda. Sodium chloride is present at <100 ppm in 50%

membrane caustic soda and at approximately 1% in 50% diaphragm caustic soda. Higher concentrations of

this compound can have undesirable effects in many applications of the product. Consequently, accurate

determination of this impurity is most impor­tant.

When acid solutions of silver ion and an alkali thiocyanate are mixed in the presence of a ferric salt, the

thiocyanate has a selective action toward silver, resulting in the formation of silver thiocyanate. Any excess

of thiocyanate not required by the silver reacts with ferric salt to form reddish-brown ferric thiocyanate. This

color indicates the completion of the reaction.

An excess of silver nitrate and the ferric indicator is added to a sample of caustic soda that has been acidified

with nitric acid. Any chloride that is contained in the sample will react with the silver nitrate to form a silver

chloride precipitate. The silver nitrate that is remaining in the sample solution after this reaction is titrated with

a standardized solution of ammonium thiocyanate. The equations involved are:

AgNO3 + NaCl → AgCl + NaNO3

Excess AgNO3 + NH4CNS → AgCNS + NH4NO3

6NH4CNS + Fe2(SO4)3 → 2Fe(CNS)3 + 3(NH4)2SO4 (reddish brown color)

This procedure is based on ASTM E291-09, Standard Test Methods for Chemical Analysis of Caustic Soda

and Caustic Potash, sections 34 through 40.

OxyChem typically utilizes turbidimetric determination, potentiometric titration (similar to ASTM E291-09,

sections 41 through 47, with modifications to account for the low chloride content of membrane grade caustic

soda) or ion chromatography. For further information regarding any of these methodologies, please contact

Technical Service.

APPARATUS

25ml Buret; Class A Volumetric, Fisher Scientific Cat#:03-724-10A or equivalent.

20ml Pipet; Class A Volumetric, Fisher Cat#: 13-650-2N

500ml Erlenmeyer flasks; wide mouth, Fisher Cat#: 10-090C or equivalent.

Magnetic stirrer; Fisher Cat#:14- 493-120S or equivalent.

Magnetic stirring bars; 1 1/2” x 5/16” dia, Fisher Cat#: 14-511-64 or equivalent.

Analytical Balance; capable of weighing to 0.001 grams

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (54)

54

REAGENTS

Water, Deionized.

0.1N Silver Nitrate; accurately weigh 16.99 grams of ACS

Reagent grade silver nitrate (dried at 110°C for 1 hr) and transfer to a 1L volumetric flask. Dilute to volume

with deionized water, mix well and store in a tightly closed amber container. Silver nitrate and its aqueous

solutions are photo-decomposed by light and should be stored in a dark place.

0.1N Ammonium Thiocyanate; accurately weigh 7.612 grams of ACS Reagent grade ammonium

thiocyanate and transfer to a one liter volumetric flask. Dilute to volume with deionized water, mix well and

store in a tightly stoppered glass bottle. The thiocyanate solution must be standardized to within ±0.0001N

prior to use.

Ferric Indicator; prepare a saturated aqueous solution of ferric ammonium sulfate [FeNH4(SO4)2],

Aldrich Cat# 22,126-0 or equivalent.

1% Phenolphthalein Indicator; dissolve one gram of phenolphthalein (Aldrich Cat#: 10,594-5 or

equivalent) in 100 ml of methanol.

Nitric Acid, 1:1 (v/v); slowly pour 500 ml of ACS Reagent grade nitric acid in 500 ml of deionized

water as it is stirring. Allow the solution to cool.

SAFETY

Refer to the SDS for the proper handling procedures for each of the chemicals listed in this

method.

Caustic soda is a strong base and nitric acid is a strong acid. These chemicals are corrosive to

body tissue and can cause immediate and severe burns to eyes. Wear proper gloves, proper eye

protection and other protective clothing when handling these chemicals.

Silver Nitrate is a strong oxidizing agent. Wear rubber gloves when handling. Contact with skin

causes a black discoloration. Keep away from heat, sparks and open flames.

PROCEDURE

A. STANDARDIZATION OF 0.1N SILVER NITRATE

Since this procedure determines the chloride content of a sample by comparing the amount of unreacted

silver nitrate remaining in a sample with the amount that is remaining in a reagent blank, the exact normality

of the silver nitrate need not be known. If a reagent blank is not used, silver nitrate standardization is

essential. A manual titration method is described in “ASTM Standard Practice for Preparation,

Standardization and Storage of Standard Solutions for Chemical Analysis”, Vol 15.05; E200-91, 44- 48.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (55)

B. STANDARDIZATION OF 0.1N AMMONIUM THIOCYANATE

1. Use a volumetric pipet to transfer 20.00 ml of freshly standardized 0.1 N silver nitrate into a 250 ml

Erlenmeyer flask containing 50 ml deionized water, 5 ml of 1:1 nitric acid and 1 ml of ferric indicator.

Titrate the AgNO3 with the NH4SCN solution until the first permanent reddish-brown color appears and

persists after vigorous shaking for 15 seconds. Record the volume of NH4SCN required. Repeat the

above procedure on at least three more solutions of silver nitrate.

2. Use the following formula to calculate the normality of the ammonium thiocyanate solution:

N1 = (N2) (V2) / (V1)

where:

N1 = Normality of NH4SCN

N2 = Normality of AgNO3

V1 = Volume of NH4SCN required

V2 = Volume of AgNO3 added

3. Determine the normality by averaging the results of at least three titrations.

C. PROCEDURE

1. In a clean dry Erlenmeyer flask, accurately weigh, to the nearest 0.001 g for smaller samples and 0.01 g

for larger samples, an amount of product as determined in the following table. Weighing should be

performed as rapidly as possible.

SAMPLE SIZE FOR CHLORIDE ANALYSIS

Product Sample size

50% Diaphragm grade 6g

50% Membrane grade 80g

2. Immediately add 100 ml of deionized water, making sure the sides of the beaker are washed down.

3. Add 2 drops of 1% phenolphthalein indicator and carefully neutralize the sample with 1:1 nitric acid.

Caution: The sample solutions generate considerable heat when being neutralized with acid.

The flask should be continuously cooled in an ice bath while the acid is slowly added. After the

phenolphthalein endpoint has been reached (color changes from pink to colorless), add an

additional 5.0 ml of acid.

4. Allow the solution to cool to room temperature and add a stirring bar to the flask.

5. Using a volumetric pipet add 20.00 ml of 0.1N silver nitrate, also add approximately 1 ml of the ferric

indicator solution.

Note: Sample solutions should be titrated within several minutes of adding the silver nitrate.

The silver chloride has a tendency to decompose with exposure to light giving the solution a purplish

color. This color can interfere with an accurate determination of the endpoint color change.

6. Prepare a reagent blank by adding two drops of phenolphthalein, 5ml nitric acid, 20.00 ml silver nitrate

solution and 1ml of ferric indicator to a flask containing 100 ml of deionized water and a stirring bar.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (56)

56

7. Place the flask containing the reagent blank on a magnetic stirrer and titrate the solution with 0.1N

ammonium thiocyanate until a reddish-brown color persists for at least 15 seconds. Record the volume of

NH4SCN required to reach the color change.

Note: From the outset of the back-titration with ammonium thiocyanate, an appreciable quantity of silver ions

are absorbed on the surface of the precipitates. Because of this, there is a tendency for a premature

appearance of the endpoint color. Vigorous stirring or shaking of the solution is essential to bring about

desorption of silver ions from the precipitates so they can react with the thiocyanate.

8. Titrate the sample solution with 0.1N ammonium thiocyanate until the same color change is reached and

record the volume of NH4SCN.

Note: As the endpoint is approached, increasing amounts of silver thiocyanate precipitating out of

solution will actually increase the solubility of silver chloride. Silver chloride that has precipitated will redissolve,

allowing additional silver ions to react with the thiocyanate. This causes a fading endpoint and results in low

chloride values. For samples containing concentrations of chloride greater than 0.01%, it is advisable to filter

the sample solution through semi-quantitative paper after the addition of silver nitrate but prior to titration with

thiocyanate. Removing most of this precipitate will greatly decrease the amount of silver that can be

redissolved during the titration.

Note: The white precipitate of silver thiocyanate interferes with observation of the color change at the

titration endpoint. It is sometimes helpful to stop the stirring or shaking of the sample and allow the precipitate to

settle, in order to observe the color of the sample solution. If it is determined during this observation that the

endpoint has not yet been reached, resume vigorous stirring before addition of more NH4SCN.

D. CALCULATIONS

The following is the formula is used to calculate the percent chloride in the sample.

Let:

W = Weight of sample titrated

N = Normality of NH4SCN

V1 = Volume of NH4SCN required to titrate blank

V2 = Volume of NH4SCN required to titrate sample

Milliequivalent wt. of Cl = 0.03545

%Cl = (V1-V2) (N) (0.03545) (100)

W

Calculate the percentage of sodium chloride as follows:

%NaCl = (%Cl) (1.6485)

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (57)

EXAMPLE

79.28 grams of 50% Membrane grade caustic soda required the addition of 19.54 ml of 0.1005 N

NH4SCN to reach the titration end­point while the reagent blank required 19.95 ml of NH4SCN to reach

the same endpoint.

%Cl = (V1-V2) (N) (0.03545) (100)

W

%Cl = (19.95-19.54) (0.1005) (3.545)

79.28

%Cl = 0.00180

%NaCl = (%Cl)(1.6485)

%NaCl = (0.00180) (1.6485)

%NaCl = 0.0030% or 30 ppm

QUALITY ASSURANCE

Because of difficulties in determining the exact endpoint when using this method, only skilled laboratory

personnel should attempt to perform these titrations.

On a regular basis, samples that have been previously analyzed for chloride content should be

reanalyzed and the results compared.

Chloride values should be checked against OxyChem specifications.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (58)

58

DETERMINATION OF IRON IN CAUSTIC SODA

PURPOSE AND THEORY

Iron can result from contamination during storage or transport of the product. Since iron is often

detrimental to the end use of the product, accurate quantitation of this element is essential.

Caustic soda is neutralized with hydrochloric acid and the resulting solution buffered with sodium acetate.

Hydroxylamine hydrochloride reduces any iron present in the ferric state to the ferrous state.

o-Phenanthroline (1,10-Phenanthroline Monohydrate) forms an orange-red complex with ferrous iron. The

intensity of the color is proportional to the amount of iron present. By measuring the color intensity with a

spectrophotometer, the concentration of iron in a sample of caustic soda can be determined.

This procedure is based on ASTM E291-09, Standard Test Methods for Chemical Analysis of Caustic Soda

and Caustic Potash, Sections 56 through 64.

APPARATUS

Visible Spectrophotometer: able to measure absorbance or percent transmittance at 510

nanometers.

Analytical Balance: capable of reading to 0.01 grams.

Volumetric Flask, 1 L, class A: Fisher catalog # 10-210-8G or equivalent

Volumetric Flask, 100 ml, class A: Fisher catalog # 10-210-8C or equivalent

Pipets, Volumetric, Class B:

1 ml - Fisher catalog # 13-650B or equivalent

2 ml - Fisher catalog # 13-650C or equivalent

5 ml - Fisher catalog # 13-650F or equivalent

10 ml - Fisher catalog # 13-650L or equivalent

15 ml - Fisher catalog # 13-650M or equivalent

Indicator Paper, Hydrion, pH 3.0 to 5.5: Fisher catalog # 14-853-70 or equivalent)

Disposable plastic pipets ("Dispo-pipet")

Cuvettes, quartz: appropriate to the spectrophotometer in use, 25 mm diameter is typical but other

path lengths providing detection limits suitable for the user are acceptable.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (59)

REAGENTS

Deionized Water

Hydrochloric Acid, concentrated: reagent grade, Fisher catalog # A144 or equivalent

Sodium Acetate, 164 grams per liter: weigh 164.0 (+/- 0.1) grams of sodium acetate, Fisher catalog #

S210-500 or equivalent, dissolve and dilute to 1 liter with deionized water in a 1 liter volumetric flask

Hydroxylamine Hydrochloride, 100 grams per liter: weigh 100.0 (+/- 0.1) grams of hydroxylamine

hydrochloride, Fisher catalog # H330-500 or equivalent, dissolve and dilute to 1 liter with deionized water

in a 1 liter volumetric flask.

o-Phenanthroline, 0.25 %: weigh 2.50 (+/- 0.05) grams of 1,10-Phenanthroline Monohydrate, Fisher

catalog # P70-10 or equivalent, dissolve and dilute to 1 liter with deionized water in a 1 liter volumetric flask

1000 μg/ml Iron Standard, suit­able for ICP/AA, Spex standard available from Fisher as catalog #

PLFE2-2Y or equivalent

SAFETY

Refer to the SDS for the proper handling procedures for each of the chemicals listed in this

procedure.

Caustic soda is a strong base. Hydrochloric acid is a strong acid. The Iron Reference Solution is

acidified with HCl. All of these chemicals are corrosive to body tissue and can cause immediate

and severe burns to eyes. Wear proper gloves, proper eye protection and other protective

clothing when handling these materials.

Refer to instrument manual for the proper use of equipment described in this method.

PROCEDURE

A. SAMPLE ANALYSIS

1. Weigh the appropriate sample, based on the table below, into a clean 100 ml volumetric flask.

Record the sample weight.

SAMPLE SIZE

Product Sample size

50% diaphragm grade 5-10g

50% membrane grade 15-20g

2. Add deionized water to the flask, such that the flask is slightly less than half-full, and swirl to mix the

solution.

3. SLOWLY and CAREFULLY, add concentrated hydrochloric acid to the flask while constantly swirling the

flask. Continue to add until the solution is just acidic. Check the pH by dipping a clean glass rod into the

flask and touching the rod to the pH indicator paper. If acidic, the paper will turn red. If it is still basic, the

paper will be blue. (If another type of indicator paper is used, verify the appropriate colors for the paper

you are using.)

CAUTION: This is a reaction involving a strong base and a strong acid. Be sure to add the acid

slowly and to maintain swirling so that spattering does not occur. The solution and flask will become

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (60)

60

4. If additional samples are to be analyzed, repeat steps 1 to 3 above for each sample.

5. Prepare a blank by adding about 40 ml of deionized water and about 2 ml of concentrated

hydrochloric acid to a separate, clean 100 ml volumetric flask.

6. Using a dispo-pipet, add sufficient sodium acetate solution to the flasks (the samples and the blank) to

buffer the solution to pH 3.5 +/- 0.5 pH units. Check the pH by dipping a clean glass rod into the flask and

touching the rod to the pH indicator paper. At the proper pH, the paper will have a light green color. (If

another type of indicator paper is used, verify the appropriate color for the paper you are using.)

7. Pipet 5 ml of hydroxylamine hydrochloride solution to each flask.

8. Pipet 5 ml of o-Phenanthroline solution to each flask.

9. Fill the flasks to volume with deionized water and shake well to mix. Allow a minimum of 15 minutes

for color development but complete the reading of the samples within 30 minutes.

10. Rinse a clean cuvette twice with small portions of the blank solution. Then fill the cuvette with the

blank solution. Assure that there are no bubbles present and wipe off the outside of the cuvette with

a soft, lint-free tissue. Place the cuvette into the spectrophotometer and zero the instrument at 0

(zero) absorbance (A) or 100% transmittance (T). Operate the spectrophotometer as directed in

your instrument manual. Remove the cuvette from the instrument.

11. Fill a cuvette with the sample solution and load it into the spectrophotometer in the same fashion as

described in step 9 above. Record the instrument reading as either A or T, depending upon how

your calibration curve was constructed. (See section C below.)

B. QUALITY CONTROL

1. Perform a duplicate analysis with each batch of samples. Simply repeat the Sample Analysis in

section A above using an additional aliquot of a sample. If large numbers of samples are tested, it is

suggested that a duplicate analysis is performed on one of every ten samples.

2. Perform a sample spike analysis with each batch of samples. To do so, prepare a second aliquot of

a sample as directed in steps 1 and 2 of the Sample Analysis in section A above. Then pipet 2 ml of

the 10 pg/ml iron stock standard (see step 1 in section C below) into the flask. Complete the sample

preparation as described in the remaining steps of section A. This procedure provides about a 1

(one) pg/g (1 ppm) spike for membrane caustic soda or about a 2 to 4 pg/g (2 to 4 ppm) spike for

diaphragm caustic soda. Different spike levels may be obtained by adding more or less of the iron stock

standard or using different iron concentration solutions.

3. The relative percent difference between duplicates should be no more than 20%.

4. The spike recovery should be in the 80% to 120% range.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (61)

C. SPECTROPHOTOMETER CALIBRATION

1. Prepare a stock 10 pg/ml iron standard by pipetting 1 ml of the 1000 pg/ml iron standard to a 100 ml

volumetric flask and diluting to volume with deionized water.

2. Obtain six 100 ml volumetric flasks and label them as 'Blank', '10 pg', '20 pg', '50 pg', '100 pg' and '150

pg'. To each of these, add about 25 ml of deionized water and 2 ml of concentrated hydrochloric acid.

3. Pipet 1 ml of the 10 pg/ml iron stock standard (prepared in step 1 above) to the flask labeled '10 pg'.

Similarly, pipet 2 ml of the iron stock to the flask labeled '20 pg', 5 ml to the flask labeled '50 pg', 10

ml to the flask labeled '100 pg', and 15 ml to the flask labeled '150 pg'.

4. Complete the preparation and reading of the standards by following steps 6 through 11 in section A

above.

5. Many spectrophotometers will allow storing the calibration curve directly on the instrument. If this is not

the case, you may wish to use a least squares regression analysis to store the calibration on a

calculator or PC program. Finally, calibration curves may be drawn manually using normal graph

paper if plotting concentration vs. absorbance (A) or semi-log paper if plotting concentration (linear

axis) vs. transmittance (T - log axis).

CALCULATION

Calculate the ppm iron by dividing the micrograms of iron found from the calibration curve (C) by the sample

weight (W):

ppm Fe = C / W

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (62)

62

DETERMINATION OF OTHER ELEMENTS IN CAUSTIC SODA

OxyChem typically utilizes inductively Coupled Argon Plasma-Atomic Emission Spectroscopy (ICAP-

AES) for the analysis of metals or elements in caustic soda.

Hydride Generation Atomic Absorption (HG-AA) is used for the determination of antimony, arsenic and

bismuth in order to obtain lower detection limits than are achievable via ICAP-AES.

For the determination of mercury, an automated cold vapor atomic absorption (CVAA) method, based on

EPA Method 245.1 and ASTM E538, is utilized.

Note: OxyChem is a mercury-free producer of caustic soda and caustic potash. OxyChem last used mercury

cells in 2008, becoming the first mercury-free producer of caustic potash in North America. OxyChem was

already a mercury-free producer of caustic soda before 2008.

Since the operation of these instruments varies from manufacturer to manufacturer, a specific method is not

included here. Follow your instrument manufacturer's instructions and recommendations for performing

analysis of this type.

IMPORTANT!!!

Regardless of the brand of instrument, it is necessary to keep in mind that calibration standards must be

similar to the sample being analyzed if results are to be considered accurate.

Caustic soda will form a significant amount of salt when neutralized; for example, sodium chloride if

neutralized with hydrochloric acid or sodium nitrate if neutralized with nitric acid. Since the sample contains a

high amount of dissolved solids, calibration standards must be prepared in a similar matrix or sample results

will be in error.

One means of addressing this is to prepare standards containing the same amount of dissolved salt that a

sample would contain. This requires obtaining high purity salts, which can be quite costly. Another more

economical means of accomplishing the "matrix match" is to use calibration by standard addition.

In general, analytical results obtained for elements in caustic soda will be significantly higher than the actual

values if the samples are analyzed using a calibration based on "clean" aqueous standards as might be used

for water analysis.

M E T H O D S O F A N A L Y S I S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (63)

Caustic soda solutions are billed on a basis that is standard to the industry. They are billed by the dry

ton based on NaOH being 76% Na2O.

Example: A customer orders a truck of 50% NaOH. The net weight was 45,160 pounds. The total

alkalinity as Na2O from the COA is 38.53%. Also referred to as the test factor on the invoice. The Billing

Price is $551.77/DT.

1. Billing Weight in Dry Ton (DT):

45,160 lb 38.53% Na2O

2,000 lb/ton 76% Na2O

2. Invoice Amount:

11.447 DT NaOH × $551.77/DT = $6,316.11

HISTORY OF THE 76% Na2O BASIS FOR BILLING CAUSTIC SODA

Lye was first produced by reacting soda ash with lime.

Na2CO3 + Ca(OH)2 → 2NaOH + CaCO3

Soda Lime Lye Calcium

Ash Carbonate

The soda ash industry used alkalinity reported as Na2O to express concentration. Alkalinity is a measure

of the amount of acid a solution can neutralize. The lye industry adopted using alkalinity reported as

Na2O to express concentration, so it could be directly compared to soda ash.

Na2CO3 → Na2O + CO2

2NaOH → Na2O + H2O (eq.1)

Lye was sold dry and at best was 98% pure, which equated to an alkalinity of 76% (77.48 × 98% ≈ 76).

So instead of caustic soda being 77.48% Na2O, 76% Na2O became the basis.

Note: Per eq.1 above it take two moles of NaOH to make one mole Na2O, therefore 80 pounds of

NaOH (2 × 40.00 = 80.00) will make 61.98 pounds of Na2O or NaOH is 77.48% Na2O

(61.98 / 80.00 × 100 = 77.48%).

The molecular weight of NaOH and Na2O is 40.00 and 61.98 lb/mole, respectively.

B I L L I N G F O R L I Q U I D C A U S T I C S O D A

× = 11.447 DT NaOH

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (64)

64

® Teflon is a registered trademark of DuPont de Nemours.

® Hastelloy is a registered trademark of Haynes International.

® Inconel is a registered trademark of Inco Limited.

® Monel is a registered trademark of Inco Limited.

N O T E S

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (65)

B I B L I O G R A P H Y

Cell diagrams (page 7 & 9) courtesy of www.eurochlor.org

Other pictures courtesy of www.oxychem.com

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (66)

66

5005 LBJ Freeway

Suite 2200

Dallas, TX 75380

Technical Service

1-800-733-1165 option 2

O X Y C H E M

Caustic Soda Handbook March 2018

Caustic Soda Handbook - Occidental &middot; PDF fileIntroduction and Principal Uses 5 Manufacturing 6 Methods of Shipping Caustic Soda 9 Safe Handling of Caustic Soda 10 Unloading Caustic - [PDF Document] (2024)

FAQs

Is caustic soda harmful to humans? ›

Sodium hydroxide is a potentially dangerous substance. It can hurt you if it touches your skin, if you drink it or if you breathe it. Eating or drinking sodium hydroxide can cause severe burns and immediate vomiting, nausea, diarrhea or chest and stomach pain, as well as swallowing difficulties.

What is caustic soda used for? ›

This compound is an alkali – a type of base that can neutralize acids and is soluble in water. Today caustic soda can be manufactured in the form of pellets, flakes, powders, solutions and more. What is caustic soda used for? Caustic soda is often used to manufacture cleaning products like soaps and detergents.

What should you do if you get caustic soda on your skin? ›

Rapid decontamination is critical.

Immediately brush any solid material from clothes, skin, or hair while protecting the victim's eyes. Quickly remove contaminated clothing and flush exposed areas with water for at least 15 minutes.

What should not be cleaned with caustic soda? ›

Sodium Hydroxide can attack IRON, COPPER, PLASTICS, RUBBER and COATINGS.

What happens if you touch caustic soda? ›

sodium hydroxide can cause severe burns to the eyes, skin, digestive system or lungs, resulting in permanent damage or death.

Is caustic soda stronger than bleach? ›

Cleaning Strength: Caustic soda is superior in removing grease and heavy stains, while bleach is more effective for color removal and disinfection. Fabric Safety: Both chemicals require careful handling, but bleach can be harsher on colored fabrics, leading to fading.

What neutralizes caustic soda? ›

Skin Exposure

・If caustic soda comes into contact with clothing, immediately remove the clothing and wash the skin with a large quantity of flowing water for a long time. Then neutralize the caustic soda with a boric acid solution or ammonium chloride solution.

What does caustic do to your body? ›

Breathing in caustic products may cause irritation of the nose, throat, airways, and stomach. Severe exposures may even result in burns to the airways. Symptoms of inhaling caustics may include: Discomfort in the nose and/or throat.

Is lye harmful to humans? ›

Lye water (sometimes called 'Lime Water') is a strong (caustic) liquid that is safe to use in very small amounts in cooking, but it can be dangerous if lye water is swallowed undiluted straight from the bottle. It can cause severe corrosive burns to the throat, oesophagus and stomach with permanent damage if swallowed.

Will caustic soda clean a toilet bowl? ›

Caustic Soda is an extremely effective product which can be used for unblocking drains/pipes, cleaning patios, paths, driveways, brickwork etc, general heavy duty cleaning, degreasing, sanitising dustbins, kennels, toilet bowls. Gently sprinkle the contents of the bottle (500grams) into 5 litres of cold water.

What happens when you mix hydrogen peroxide and caustic soda? ›

When hydrogen peroxide is mixed with caustic soda, an auto-accelerating reaction can lead to generation of significant amounts of heat and oxygen. On the basis of experiments using typical pulp mill process concentration and temperatures, a relatively simple kinetic model has been developed.

What happens when you mix caustic soda and water? ›

Caustic soda is exothermic, which means that they generate heat and give off hydrogen. When you add hot water to caustic soda this process can be quite dangerous as it can cause an explosion of alkali where acid can be distributed all over the place.

Caustic Soda: A Key Ingredient for Everyday LifeWestlake Corporationhttps://www.westlake.com ›

Caustic soda is the chemical compound sodium hydroxide (NaOH). This compound is an alkali – a type of base that can neutralize acids and is soluble in water. To...
Do you know what caustic soda is used in? If so, there are several applications of this product in our daily lives. Caustic soda, also known as sodium hydroxide...
Sodium hydroxide, frequently called caustic soda, finds application in a wide range of settings and industries. Its diverse qualities make the substance a valua...

What happens if you breathe in caustic soda? ›

Breathing sodium hydroxide dust or mist causes mild or serious effects, depending on the amount of exposure. Effects may include sneezing, sore throat or runny nose. Severe inflammation of the lungs can occur. Swallowing sodium hydroxide may cause severe burns in the mouth, throat and stomach.

Is caustic soda considered hazardous? ›

Human health Corrosive. Prolonged contact causes serious eye and tissue damage. Label In Accordance With (EC) No. 1272/2008 91 / Page 2 CAUSTIC SODA Signal Word Danger Hazard Statements H314 Causes severe skin burns and eye damage.

Is caustic soda in soap bad for you? ›

What's the short answer? Sodium hydroxide is overall considered safe for general use — but only in small amounts, at lower concentrations. At higher concentrations, sodium hydroxide is unsafe. It can cause chemical burns, as noted above, along with hives and holes in your skin.

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Jerrold Considine

Last Updated:

Views: 6396

Rating: 4.8 / 5 (78 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Jerrold Considine

Birthday: 1993-11-03

Address: Suite 447 3463 Marybelle Circles, New Marlin, AL 20765

Phone: +5816749283868

Job: Sales Executive

Hobby: Air sports, Sand art, Electronics, LARPing, Baseball, Book restoration, Puzzles

Introduction: My name is Jerrold Considine, I am a combative, cheerful, encouraging, happy, enthusiastic, funny, kind person who loves writing and wants to share my knowledge and understanding with you.