Set and Rep Schemes in Strength Training – Part 2 - Complementary Training (2024)

Here is a second installment of set and rep schemes article for EliteFTS. You can read the first part of the article HERE.

The purpose of the article is to ‘explain’ (or at least raise awareness) to the difference between Training objectives, Training parameters, and Training progressions and variations. In simple words, training objectives represent a description of what needs/can/should to be done to get from point A (current state) to point B (future state), defined by Needs Analysis and Athlete Characteristic taking into account context at hand.

Overview of the process

As I have alluded to in the beginning of this article, training objectives will demand certain training parameters within which we can employ various progressions and variations, termed set and reps schemes.

The whole process looks like this:

Set and Rep Schemes in Strength Training – Part 2 - Complementary Training (1)

This is the simple process (it is definitely not linear as depicted, but involves a lot of feedback information to redefine certain components based on real-life results ~ hence the importance of monitoring and measuring) that outlines the planning and programming of training.

On the following table, there is an example breakdown of these processes for an intermediate powerlifter.

Process
Needs analysisHigh level of strength in bench, squat and deadlift. Maintain bodyweight. 3 months to competition. Low budget. Public gym access.
Athlete characteristicsGood bench presser. Bad back. Highly motivated. Loves training in group. No experience with gear (trained raw)
Training objectivesFix the bad back. Maintain bench press performance. Learn to use gear. Improve squat and deadlift.
Training parametersTrain 5x/week. Do bench press 2x/wk at the end of practices. First two months work on weaknesses, last month work on strength and practice competition lifts. High frequency approach. Work on squat/DL every training day.
Progressions and variationsFlat loading first to accumulate volume. Switch to step loading.

This is just an example without too many details (especially in training parameters and progressions), but I hope you get the picture.

As alluded at the beginning of this article, certain variations and progressions in training parameters are more suited toward different training objectives, but there exist commonalities between them that we will focus on. Thus regardless of what you are training for (training objectives) there exist certain set and rep schemes (progressions and variations) you can employ on different time scales.

I will be relying on various writings by Dan Baker, Ashley Jones, Joe Kenn, and others in this classification and terminology. Please see references for further details

Workout set and rep schemes

Within this time frame, set and rep schemes refer to one exercise and one workout. Here are a couple of variations that are frequently done in strength training.

Plateau Load5 x 5 @ 75%
Step Load1 x 5 @ 65%, 1 x 5 @ 70%, 1 x 5 @ 75%, 1 x 5 @ 80%, 1 x 5 @ 85%
Step Load plus Back Off1 x 5 @ 65%, 1 x 5 @ 70%, 1 x 5 @ 75%, 1 x 5 @ 80%, 1 x 5 @ 85%, 3 x 5 @ 65%
Reverse Step Load1 x 5 @ 85%, 1 x 5 @ 80%, 1 x 5 @ 75%, 1 x 5 @ 70%, 1 x 5 @ 65%
Traditional Pyramid1 x 10 @ 70%, 1 x 8 @ 75%, 1 x 6 @ 80%, 1 x 8 @ 75%, 1 x 10 @ 70%
Reverse Pyramid1 x 6 @ 80%, 1 x 8 @ 75%, 1 x 10 @ 70%, 1 x 8 @ 75%, 1 x 6 @ 80%
Ascending Half Pyramid – Light to Heavy1 x 10 @ 70%, 1 x 8 @ 75%, 1 x 6 @ 80%
Descending Half Pyramid – Heavy to Light1 x 6 @ 80%, 1 x 8 @ 75%, 1 x 10 @ 70%
Ascending Rep Pyramid1 x 4 @ 70%, 1 x 5 @ 70%, 1 x 6 @ 70%, 1 x 7 @ 70%, 1 x 8 @ 70%
Descending Rep Pyramid1 x 10 @ 70%, 1 x 9 @ 70%, 1 x 8 @ 70%, 1 x 7 @ 70%, 1 x 6 @ 70%
Standard Set Wave1 x 10 @ 60%, 1 x 10 @ 67.5%, 1 x 10 @ 65%, 1 x 10 @ 72.5%
Ascending Half Pyramid Wave – Light to Heavy1st Wave: 1 x 10 @ 70%, 1 x 8 @ 75%, 1 x 6 @ 80%
2nd Wave: 1 x 10 @ 72.5%, 1 x 8 @ 77.5%, 1 x 6 @ 82.5%
Descending Half Pyramid Wave – Heavy to Light1st Wave: 1 x 6 @ 80%, 1 x 8 @ 75%, 1 x 10 @ 70%
2nd Wave: 1 x 6 @ 82.5%, 1 x 8 @ 77.5%, 1 x 10 @ 72.5%
Stable Heavy to Light1 x 1 @ 90%, 1 x 6 @ 75%, 1 x 1 @ 90%, 1 x 6 @ 75%
Ascending Heavy to Light1 x 1 @ 90%, 1 x 6 @ 75%, 1 x 1 @ 95%, 1 x 6 @ 80%
Descending Heavy to Light1 x 1 @ 95%, 1 x 6 @ 80%, 1 x 1 @ 90%, 1 x 6 @ 75%
Cluster Sets4 –5 x 5 x 1 @ 3RM load with 15 seconds rest in between each rep
Rest Pause/Myo Reps15-20+5x @ 50% load with 15 seconds rest in between each set
Daily Max plus Back Off1 x 5 @ 60, 1 x 3 @ 70%, 1 x 2 @ 80, 1 x 1 @ 90%, 1 x 1 @ 90+, 3-5 x 2-3 @ 80-90%
One Set Special1 x 5 @ 50%, 1 x 4 @ 60%, 1 x 3 @ 70%, 1 x 2 @ 80%, 1 x 3+ @ 90%
Progressive Load1 x 2 @ 70%, 1 x 2 @ 75%, 1 x 2 @ 80%, 3 x 4 @ 85%
Joe Kenn Wave1 x 2 @ 75%, 1 x 4 @ 85%, 1 x 2 @ 75%, 1 x 4 @ 85%
Joe Kenn Wave-31 x 2 @ 75%, 1 x 2 @ 80%, 1 x 4 @ 85%, 1 x 2 @ 75%, 1 x 2 @ 80%, 1 x 4 @ 85%

There is always a problem with the terminology, but I used names by Ashley Jones and Joe Kenn. Certain variations are more suitable for certain periods and objectives than others. Certain variations progress on Load/Exertion table by keeping reps the same and progressing in load and exertion, some vary reps and keep the same exertion, etc.

One can also use different set and rep schemes for the same objective at different training phases (e.g. plateau load in the accumulation phase, step load in intensification phase). The options are endless. The key is having an objective on the mind, but still providing certain variability to avoid boredom at least, or providing stronger stimuli. Certain athletes will just prefer certain variations. For example, I just hate plateau load option ~ I can do a lot more work with wave approaches with the same “mental load”.

Weekly set and rep schemes

The next progression and variation time frame is one training week (or microcycle). Depending on the number of training sessions in a week and training frequency (how many times we hit training objective, body part, muscle, biomotor ability) we devise different variations. In the table below, based on work by Dan Baker, we can find different variations for two sessions hitting the squat pattern (this could be any other movement, body part, or training objective).

Method of variationDay 1 exampleDay 2 example
1. Same exercises and other variables, increase repetitions, and decrease resistanceSquat 3 × 10 @ 70%Squat 3 × 15 @ 60%
2. Same exercises and other variables, increase or decrease the number of sets.Squat 4 × 10 @ 70%Squat 2 × 10 @ 70%
3. Same exercises, sets, and repetitions, reduce the lifting speed and resistance.Squat 3 × 10 @ 70%Squat 3 × 10 @ 50% (4s/rep)
4. Same exercises and other variables, decrease rest periods and resistanceSquat 3 × 10 @ 70% (3min/rest)Squat 3 × 10 @ 50% (1min/rest)
5. Same exercises and other variables, decrease resistance.Squat 3 × 5 80%Squat 3 × 5 @ 70%
6. Same exercises and other variables, decrease repetitions.Squat 3 × 5 @ 80%Squat 3 × 2 @ 80%
7. Different strength exercises, but same for all other variables (same %1RM).Squat 3 × 10 @ 70%Front squat 3 × 10 @ 70%
8. Perform a strength and power version of aligned exercises on different days.Squat 3×5 @ 80%Jump squat 3 × 5 @ 40%
9. Perform heavier and lighter versions of aligned power exercises on different days.Power clean 3 x 5 @ 70%Power snatch 3 x 5 @ 70%
10. Same exercise, sets, and repetitions, different muscle regimeSquat 3 x 5 @ 80%Squat 3 x 5 @ 60% (3s isometric hold at three positions)
11. Same exercise, sets, and repetitions, different modalitiesSquat 3 x 5 @ 80%Squat 3 x 5 @ 60% + chains/bands
12. Same exercise, sets and repetition, different ROMSquat 3 x 5 @ 80%1/4 Squat 3 x 5 @ 80%

One frequent application of weekly variations is the Hard/Medium/Easy approach of Bill Starr or ME/DE (Maximal Effort, Dynamic Effort) of Westside.

With a higher frequency of workouts, one can choose different combinations of the variations. Certain variations are preferred based on fatigue cycles during the week (biology), priorities (objectives & biology), constraints (context), or just plain preference.

Depending on the workout set and rep schemes selected, weekly variations can have much more variety (e.g. weekly variations for plateau vs. step loading).

It is also important to say that not all exercises should follow the same variation. For example, lower body movements can use variation 5 or 6, while the upper body can use 1 or 3. This depends on the objectives, individual characteristics, and preferences.

Training block set and rep schemes

This is what Dan Baker calls “Different Cycle-Length Variants or Patterns of Periodized Strength Training”. Other coaches recognize it as Periodization Schemes. Unfortunately, most confuse training objectives (e.g. strength, power, hypertrophy, lockout strength, grip strength, hole strength, etc) and training blocks set and rep schemes. For the sake of this article, I will assume the same training objective(s) over-training block, and only focus on set and rep schemes.

This way we avoid confusing set and rep variations and training objectives emphasis (e.g. undulating periodization sometimes call for weeks of 4 x 10, 4 x 6, 4 x 8, 4 x 4, and that approach not only provides variety but also hit different training objectives like hypertrophy and strength). It is important to differentiate to different ways to ‘attack’ training different objectives (e.g. parallel, sequential, undulating, whatever fancy name there is today) and block set and rep schemes variations aimed at ‘attacking’ the SAME training objective.

On the following table, there are frequent variations utilizing different ‘progressions’ on the Load/Exertion table. Don’t mind the names, but try to get the underlying principles in load progression and variation.

NameWeek12345678
ConstantSame reps, same sets, increase load and exertion3×8
71%
3×8
73%
3×8
75%
3×8
67%
3×8*
71%
3×8
73%
3×8
75%
3×8
67%
“Traditional”Same reps, high to low sets, increase load and exertion6×8
68%
5×8
70%
4×8
72%
3×8
74%
6×8*
68%
5×8
70%
4×8
72%
3×8
74%
Rep AccumulationSame load, same sets, increase number of reps and exertion3×8
68%
3×9
68%
3×10
68%
3×11
68%
3×8*
68%
3×9
68%
3×10
68%
3×11
68%
LinearSame sets and exertion, decreasing number of reps, load increase3×5
79%
3×4
81%
3×3
83%
3×2
86%
3×5*
79%
3×4
81%
3×3
83%
3×2
86%
Linear DecreasingSame sets and exertion, increasing number of reps, load decrease3×2
86%
3×3
83%
3×4
81%
3×5
79%
3×2*
86%
3×3
83%
3×4
81%
3×5
79%
Traditional & LinearSame exertion, decreasing number of reps and sets, load increase6×5
79%
5×4
81%
4×3
83%
3×2
86%
6×5*
79%
5×4
81%
4×3
83%
3×2
86%
Linear with exertion increaseSame sets, decreasing number of reps, load and exertion increase3×5
79%
3×4
83%
3×3
89%
3×2
93%
3×5*
79%
3×4
83%
3×3
89%
3×2
93%
Traditional Linear with exertion increaseDecreasing number of reps and sets, load and exertion increase7×5
79%
5×4
83%
3×3
89%
1×2
95%
7×5*
79%
5×4
83%
3×3
89%
1×2
95%
Accumulation/IntensificationPhase 1: Rep accumulation
Phase 2: Traditional & Linear
6×3
80%
6×4
80%
6×5
80%
6×6
80%
5×5*
80%
4×4
85%
3×3
90%
2×2
95%
Constant with unloadConstant with 4th week unload3×8
73%
3×8
75%
3×8
77%
3×8
%70
3×8*
73%
3×8
75%
3×8
77%
3×8
%70
Linear with unloadLinear with 4th week unload3×5
79%
3×4
81%
3×3
83%
3×4
75%
3×5*
79%
3×4
81%
3×3
83%
3×4
75%
UndulatingUndulaitng reps progression and intensity, same sets and exertion3×10
70%
3×6
77%
3×8
73%
3×4
81%
3×10*
70%
3×6
77%
3×8
73%
3×4
81%

* Represents increase in 1RM (e.g. for 2-5kg

There are many more progressions and variations, but these are the common ones that are utilized under the same training objective. Don’t hang up too much on this table, but use it as an example. The table refers to plateau loading in the workout, but the principles could be applied to all other workout set and rep schemes.

Please note that there could be different progressions for different training days (e.g. in weekly variation day 1 could progress using a traditional and linear progression, and day two could progress using rep accumulation) and even different exercises (e.g. main lifts could use different progression than assistance). This makes an infinite number of combinations one could choose from. Again, for certain objectives or even exercises, we could prefer one block progression over another.

Hopefully, this article provided an overview of the “traditional” (percent-based) approach to strength training, with its different processes and different reps and sets progressions and variations on the workout, week, and block time frames.

How to Implement This in “Real Life”?

Since the time this article was published on EliteFTS, I was working on translating the above-mentioned set and rep schemes into a ready-to-use Excel template, for both team/group workout and individual programs.

The good news is that we have recently released a newly redesigned version of Strength Card Builder, which now includes more than 1900 set and rep schemes from the Strength Training Manual Books (Volume 1 & Volume 2).

Here are the PDF previews of the Strength Card Builder outputs

  1. Individual card
  2. Group card – portrait (12×8)
  3. Group card – landscape (6×10)

If you want to know more about SCB, check out the two short videos below:

Demo Video (version 5.0)

Instructional Video (version 5.0)

The new version of SCB can be downloaded for free by Premium members, as well as Standard members who have been in our community for over a year. All Standard members who are with us less than a year will also be able to download SCB free of charge, as soon as they fulfill a condition above.

If you are currently not a member of the Complementary Training community, I would like to invite you to become one.

Set and Rep Schemes in Strength Training – Part 2 - Complementary Training (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Corie Satterfield

Last Updated:

Views: 6548

Rating: 4.1 / 5 (42 voted)

Reviews: 89% of readers found this page helpful

Author information

Name: Corie Satterfield

Birthday: 1992-08-19

Address: 850 Benjamin Bridge, Dickinsonchester, CO 68572-0542

Phone: +26813599986666

Job: Sales Manager

Hobby: Table tennis, Soapmaking, Flower arranging, amateur radio, Rock climbing, scrapbook, Horseback riding

Introduction: My name is Corie Satterfield, I am a fancy, perfect, spotless, quaint, fantastic, funny, lucky person who loves writing and wants to share my knowledge and understanding with you.